Julian Date
rmarcinik
rmarcinik at juno.com
Tue Mar 16 12:20:54 CDT 2010
That's what conditional compile statements are for. Most developers
writing software for multiple platforms use them,
e.g. @IF HP3K...
>
> Today's Topics:
>
> 1. RE:Julian date (Ken Langendock)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 15 Mar 2010 13:03:33 -0400
> From: "Ken Langendock" <ken.langendock at rogers.com>
> Subject: RE: Julian date
> To: <powerh-l at lists.sowder.com>
> Message-ID: <004601cac461$7237ece0$56a7c6a0$@langendock at rogers.com>
> Content-Type: text/plain; charset="us-ascii"
>
> The problem with using an HP system variable is the code becomes
> non-portable.
>
> If you are planning on porting this application down the road at any
> time.I
> suggest NOT using any O/S variables.
>
>
>
> Ken
>
>
>
> From: powerh-l-bounces+ken.langendock=rogers.com at lists.sowder.com
> [mailto:powerh-l-bounces+ken.langendock=rogers.com at lists.sowder.com]
> On
> Behalf Of Lowe, Chuck J
> Sent: March 15, 2010 12:36 PM
> To: Pickering, John (NORBORD); Ken at Langendock.com;
> powerh-l at lists.sowder.com
> Subject: [Bulk] RE: [Bulk] Julian date
>
>
>
> Thanks guys.
>
>
>
> John, I'm going with Ken's version. I need the actual Julian day,
> 074 for
> today's date. His solution gives me that in D-CurrentDay.
>
>
>
> The option you give is for reporting only. I need to store it in a
> batch
> header record with QTP.
>
>
>
> Unless you can tell me how to do that in your version.
>
>
>
> Either way, I appreciate both answers.
>
>
>
> PS. Just found out there is a system variable set HPDOY that will
> also
> give me it.
>
>
>
> GLO TEMP JULIAN-DAY ZON*03 INIT
> NCON(GETSYSTEMVAL("HPDOY")[1:3])
>
>
>
>
>
>
>
> _____
>
> From: Pickering, John (NORBORD) [mailto:John.Pickering at norbord.com]
>
> Sent: Monday, March 15, 2010 11:18 AM
> To: Ken at Langendock.com; Lowe, Chuck J; powerh-l at lists.sowder.com
> Subject: RE: [Bulk] Julian date
>
> There is likely no need for Ken's complicated conversion logic!
>
>
>
> Just define your date item as type "jdate" and Powerhouse will
> convert to
> Julian format. If you are converting from a century included date
> then
> you'll need to use the removecentury function. As in:
>
>
>
> >define d-julian-date jdate = removecentury(sysdate)
>
> >report sysdate d-julian-date format yyddd
>
>
>
> Note that any date may be displayed in any format. Even a jdate will
> be
> displayed in the dictionary's default format so you'll probably need
> to
> include the format option.
>
>
>
> JWP
>
>
>
> _____
>
> From: powerh-l-bounces+john.pickering=norbord.com at lists.sowder.com
> [mailto:powerh-l-bounces+john.pickering=norbord.com at lists.sowder.com]
> On
> Behalf Of Ken Langendock
> Sent: Monday, March 15, 2010 11:12 AM
> To: 'Lowe, Chuck J'; powerh-l at lists.sowder.com
> Subject: RE: [Bulk] Julian date
>
>
>
> Try this
>
>
>
> ; Julian Date Calculations
>
> DEFINE D-CurrentYY CHARACTER * 2 &
>
> = ASCII(SYSDATE,8)[3:2]
>
> DEFINE D-JanuaryFirst DATE &
>
> = NCONVERT(ASCII(SYSDATE,8)[1:4] + "0101")
>
> DEFINE D-CurrentDay CHARACTER * 3 &
>
> = ASCII(DAYS(SYSDATE) &
>
> - DAYS(D-JanuaryFirst) + 1,3)
>
> DEFINE D-JulianDate CHARACTER * 5 &
>
> = D-CurrentYY &
>
> + D-CurrentDay
>
>
>
>
>
> From: powerh-l-bounces+ken.langendock=rogers.com at lists.sowder.com
> [mailto:powerh-l-bounces+ken.langendock=rogers.com at lists.sowder.com]
> On
> Behalf Of Lowe, Chuck J
> Sent: March 15, 2010 10:59 AM
> To: powerh-l at lists.sowder.com
> Subject: [Bulk] Julian date
>
>
>
> I must be having a bad day. Can anyone give me the code to find out
> the
> Julian date for a day . I.e. February 2nd would be 33. In QTP
> would be
> preferable.
>
>
>
> Thanks!
>
>
>
> Chuck Lowe Quest Diagnostics | Sr. Programmer/Analyst,SYS Billing
> System/Denver| 400 Egypt Rd. | West Norriton, PA 19403 USA | phone
> 610-650-6679| fax 610-650-2111 |
> <mailto:Chuck.J.Lowe at questdiagnostics.com>
> Chuck.J.Lowe at questdiagnostics.com
> | <http://www.questdiagnostics.com/> www.QuestDiagnostics.com
>
> Please think about resource conservation before you print this
> message
>
>
>
>
> ------------------------------------------
> The contents of this message, together with any attachments, are
> intended
> only for the use of the person(s) to which they are addressed and
> may
> contain confidential and/or privileged information. Further, any
> medical
> information herein is confidential and protected by law. It is
> unlawful for
> unauthorized persons to use, review, copy, disclose, or disseminate
> confidential medical information. If you are not the intended
> recipient,
> immediately advise the sender and delete this message and any
> attachments.
> Any distribution, or copying of this message, or any attachment, is
> prohibited.
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 9.0.733 / Virus Database: 271.1.1/2748 - Release Date:
> 03/15/10
> 03:33:00
>
>
> ------------------------------------------
> The contents of this message, together with any attachments, are
> intended
> only for the use of the person(s) to which they are addressed and
> may
> contain confidential and/or privileged information. Further, any
> medical
> information herein is confidential and protected by law. It is
> unlawful for
> unauthorized persons to use, review, copy, disclose, or disseminate
> confidential medical information. If you are not the intended
> recipient,
> immediately advise the sender and delete this message and any
> attachments.
> Any distribution, or copying of this message, or any attachment, is
> prohibited.
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 9.0.733 / Virus Database: 271.1.1/2748 - Release Date:
> 03/15/10
> 03:33:00
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
>
http://lists.sowder.com/pipermail/powerh-l/attachments/20100315/3e4a7bfd/
attachment.html
>
>
> ------------------------------
>
> --
> = = = = = = = = = = = = = = = = = = = = = = = = = = = =
> Mailing list: powerh-l at lists.sowder.com
> Subscribe: "subscribe" in message body to
> powerh-l-request at lists.sowder.com
> Unsubscribe: "unsubscribe <password>" in message
> body to powerh-l-request at lists.sowder.com
> http://lists.sowder.com/mailman/listinfo/powerh-l
> This list is closed, thus to post to the list you must be a
> subscriber.
> Add 'site:lists.sowder.com powerh-l' to your search terms to search
> the list archive at Google.
>
> End of powerh-l Digest, Vol 58, Issue 15
> ****************************************
>
____________________________________________________________
Get Free Email with Video Mail & Video Chat!
http://www.juno.com/freeemail?refcd=JUTAGOUT1FREM0210
More information about the powerh-l
mailing list