[BULK] RE: Windows Server / Powerhouse
Deskin, Bob
Bob.Deskin at Cognos.COM
Wed Sep 19 08:47:43 CDT 2007
The way we're set up right now on Windows, the only alternatives are
Windows Terminal Server or Remote Desktop. However, we don't do any
testing on the former and minimal testing on the latter.
If those aren't satisfactory, your alternative is to try out some telnet
clients and see if you can find a good one.
Bob
-----Original Message-----
From: Viet Nguyen [mailto:VNguyen at wsboces.org]
Sent: September 18, 2007 2:57 pm
To: Deskin, Bob; powerh-l at lists.sowder.com
Cc: Russell Dickson
Subject: RE: [BULK] RE: Windows Server / Powerhouse
Hi Bob,
There is nothing to be embarrassed about. This is clear and straight
forward answer that I was looking for.
We do need to have the processing done on the server to get the faster
data
Transfer rate from the MSSQL to Powerhouse. If we were to run it as a
client's process we would be sending data back and forth to the server
thus sending us right back to the problem we have right now with AIX.
Thanks again.
Viet.
-----Original Message-----
From: Deskin, Bob [mailto:Bob.Deskin at Cognos.COM]
Sent: Tuesday, September 18, 2007 2:56 PM
To: Viet Nguyen; powerh-l at lists.sowder.com
Subject: RE: [BULK] RE: Windows Server / Powerhouse
Well, I'm a little embarrassed, but it wouldn't be the first time. It's
not as simple as I hoped. There was so much setup involved in getting
things to work that you really wouldn't want to do it. You might as well
install PowerHouse. In fact, even if you simply use a shortcut to the
server, you're still doing your processing on the client machine.
So, back to square one. I know you were looking for a telnet client but
is there a problem with either installing PowerHouse on each workstation
(and running the licensing daemon from a central server) or using a
shortcut to the central server. In both cases, your processing will
occur on the client machine, but of course your data and application
files can be anywhere on the network.
That said, there may be other telnet clients that will work. We have not
done any extensive searching.
Bob
-----Original Message-----
From: Viet Nguyen [mailto:VNguyen at wsboces.org]
Sent: September 18, 2007 10:02 am
To: Ken Langendock; Deskin, Bob; powerh-l at lists.sowder.com
Subject: RE: [BULK] RE: Windows Server / Powerhouse
Hi Ken,
I just want something that allows me to work on windows like I am
working with AIX now. I know I can do it with Remote Desk Top but this
is too heavy and Telnet is giving me funky characters - I am waiting for
Bob to get some clarifications for Qkview. But if it can only deal with
Quick then the other 2 products are not accessible then.
-----Original Message-----
From: Ken Langendock [mailto:Ken at Langendock.com]
Sent: Tuesday, September 18, 2007 9:46 AM
To: Viet Nguyen; 'Deskin, Bob'; powerh-l at lists.sowder.com
Subject: RE: [BULK] RE: Windows Server / Powerhouse
Importance: Low
Viet,
QKView is a QUICK scrapper tool...not a QTP wrapper.
If you want to run jobs up o the server, you need a Batch Queue and
launch
screens to create the jobs.
Ken
-----Original Message-----
From: powerh-l-bounces+ken.langendock=rogers.com at lists.sowder.com
[mailto:powerh-l-bounces+ken.langendock=rogers.com at lists.sowder.com] On
Behalf Of Viet Nguyen
Sent: September 18, 2007 9:33 AM
To: Deskin, Bob; powerh-l at lists.sowder.com
Subject: RE: [BULK] RE: Windows Server / Powerhouse
Hello Bob,
Line drawing doesn't work I will look around for solutions.
With Qkview - can I install that on each workstation and tell it to Run
the
qtp program on the server on the server cpu? Or is this just A wrapper
that
launches QTP to run locally?
Thanks.
Viet.
-----Original Message-----
From: powerh-l-bounces+vnguyen=wsboces.org at lists.sowder.com
[mailto:powerh-l-bounces+vnguyen=wsboces.org at lists.sowder.com] On Behalf
Of
Deskin, Bob
Sent: Tuesday, September 18, 2007 9:27 AM
To: powerh-l at lists.sowder.com
Subject: [BULK] RE: Windows Server / Powerhouse
Importance: Low
Our developer suggests PuTTY along with setting the Windows (1252) code
page. Keep in mind that this is not directly supported since we do not
test
with it. I can't say how well line drawing will work.
Another option might be QKView (available in 8.41E) looking at a mounted
drive with the PH install location. I believe there are some customers
who
have tried that. Again we have not tested that specific scenario at this
time.
Bob
-----Original Message-----
From: powerh-l-bounces+bob.deskin=cognos.com at lists.sowder.com
[mailto:powerh-l-bounces+bob.deskin=cognos.com at lists.sowder.com] On
Behalf
Of Peter Bateman
Sent: September 17, 2007 6:55 pm
To: powerh-l at lists.sowder.com
Subject: RE: Windows Server / Powerhouse
Hi Viet:
It is my understanding to run PowerHouse on Windows
you would need to be running on you local PC.
or be using something like CITRIX or Windows terminal
server.
You could also use Axiant Thin client. This would
be my preferred method if I can't run Powerhouse locally.
Regards,
Peter Bateman
>From: "Viet Nguyen" <VNguyen at wsboces.org>
>To: "power-l" <powerh-l at lists.sowder.com>
>Subject: Windows Server / Powerhouse
>Date: Mon, 17 Sep 2007 10:30:34 -0400
>
>Hi All,
>
>Is there anyone out there running Powerhouse on Windows using Telnet
>(crt terminal emulations) with about 100 users?
>
>If yes could you give me the hardware specs that you are running
>powerhouse on.
>
>Thank you .
>
>Viet.
>
>
>
>--
>= = = = = = = = = = = = = = = = = = = = = = = = = = = = Mailing list:
>powerh-l at lists.sowder.com
>Subscribe: "subscribe" in message body to
>powerh-l-request at lists.sowder.com
>Unsubscribe: "unsubscribe <password>" in message body
to
>powerh-l-request at lists.sowder.com
>http://lists.sowder.com/mailman/listinfo/powerh-l
>This list is closed, thus to post to the list you must be a subscriber.
>Add 'site:lists.sowder.com powerh-l' to your search terms to search the
>list archive at Google.
_________________________________________________________________
See Fireworks On Live Image Search
http://search.live.com/images/results.aspx?q=Fireworks&mkt=en-ca&FORM=SE
RNEP
--
= = = = = = = = = = = = = = = = = = = = = = = = = = = = Mailing list:
powerh-l at lists.sowder.com
Subscribe: "subscribe" in message body to
powerh-l-request at lists.sowder.com
Unsubscribe: "unsubscribe <password>" in message body to
powerh-l-request at lists.sowder.com
http://lists.sowder.com/mailman/listinfo/powerh-l
This list is closed, thus to post to the list you must be a subscriber.
Add 'site:lists.sowder.com powerh-l' to your search terms to search the
list
archive at Google.
This message may contain privileged and/or confidential
information.
If you have received this e-mail in error or are not the intended
recipient,
you may not use, copy, disseminate or distribute it; do not open any
attachments, delete it immediately from your system and notify the
sender
promptly by e-mail that you have done so. Thank you.
--
= = = = = = = = = = = = = = = = = = = = = = = = = = = = Mailing list:
powerh-l at lists.sowder.com
Subscribe: "subscribe" in message body to
powerh-l-request at lists.sowder.com
Unsubscribe: "unsubscribe <password>" in message body to
powerh-l-request at lists.sowder.com
http://lists.sowder.com/mailman/listinfo/powerh-l
This list is closed, thus to post to the list you must be a subscriber.
Add 'site:lists.sowder.com powerh-l' to your search terms to search the
list
archive at Google.
--
= = = = = = = = = = = = = = = = = = = = = = = = = = = = Mailing list:
powerh-l at lists.sowder.com
Subscribe: "subscribe" in message body to
powerh-l-request at lists.sowder.com
Unsubscribe: "unsubscribe <password>" in message body to
powerh-l-request at lists.sowder.com
http://lists.sowder.com/mailman/listinfo/powerh-l
This list is closed, thus to post to the list you must be a subscriber.
Add 'site:lists.sowder.com powerh-l' to your search terms to search the
list
archive at Google.
More information about the powerh-l
mailing list