[BULK] RE: Windows Server / Powerhouse
Ken Langendock
Ken at Langendock.com
Tue Sep 18 14:04:24 CDT 2007
Viet...have you guys looked into Oracle on Windows?
The prices have dropped to the point of it being comparable to MSSQL and
there is no ODBC required.
If I remember my conversations right, a Server licence is less than an MSSQL
licence....but don't quote me on that.
Ken
-----Original Message-----
From: powerh-l-bounces+ken.langendock=rogers.com at lists.sowder.com
[mailto:powerh-l-bounces+ken.langendock=rogers.com at lists.sowder.com] On
Behalf Of Viet Nguyen
Sent: September 18, 2007 2:57 PM
To: Deskin, Bob; powerh-l at lists.sowder.com
Cc: Russell Dickson
Subject: RE: [BULK] RE: Windows Server / Powerhouse
Hi Bob,
There is nothing to be embarrassed about. This is clear and straight forward
answer that I was looking for.
We do need to have the processing done on the server to get the faster data
Transfer rate from the MSSQL to Powerhouse. If we were to run it as a
client's process we would be sending data back and forth to the server thus
sending us right back to the problem we have right now with AIX.
Thanks again.
Viet.
-----Original Message-----
From: Deskin, Bob [mailto:Bob.Deskin at Cognos.COM]
Sent: Tuesday, September 18, 2007 2:56 PM
To: Viet Nguyen; powerh-l at lists.sowder.com
Subject: RE: [BULK] RE: Windows Server / Powerhouse
Well, I'm a little embarrassed, but it wouldn't be the first time. It's not
as simple as I hoped. There was so much setup involved in getting things to
work that you really wouldn't want to do it. You might as well install
PowerHouse. In fact, even if you simply use a shortcut to the server, you're
still doing your processing on the client machine.
So, back to square one. I know you were looking for a telnet client but is
there a problem with either installing PowerHouse on each workstation (and
running the licensing daemon from a central server) or using a shortcut to
the central server. In both cases, your processing will occur on the client
machine, but of course your data and application files can be anywhere on
the network.
That said, there may be other telnet clients that will work. We have not
done any extensive searching.
Bob
-----Original Message-----
From: Viet Nguyen [mailto:VNguyen at wsboces.org]
Sent: September 18, 2007 10:02 am
To: Ken Langendock; Deskin, Bob; powerh-l at lists.sowder.com
Subject: RE: [BULK] RE: Windows Server / Powerhouse
Hi Ken,
I just want something that allows me to work on windows like I am working
with AIX now. I know I can do it with Remote Desk Top but this is too heavy
and Telnet is giving me funky characters - I am waiting for Bob to get some
clarifications for Qkview. But if it can only deal with Quick then the other
2 products are not accessible then.
-----Original Message-----
From: Ken Langendock [mailto:Ken at Langendock.com]
Sent: Tuesday, September 18, 2007 9:46 AM
To: Viet Nguyen; 'Deskin, Bob'; powerh-l at lists.sowder.com
Subject: RE: [BULK] RE: Windows Server / Powerhouse
Importance: Low
Viet,
QKView is a QUICK scrapper tool...not a QTP wrapper.
If you want to run jobs up o the server, you need a Batch Queue and launch
screens to create the jobs.
Ken
-----Original Message-----
From: powerh-l-bounces+ken.langendock=rogers.com at lists.sowder.com
[mailto:powerh-l-bounces+ken.langendock=rogers.com at lists.sowder.com] On
Behalf Of Viet Nguyen
Sent: September 18, 2007 9:33 AM
To: Deskin, Bob; powerh-l at lists.sowder.com
Subject: RE: [BULK] RE: Windows Server / Powerhouse
Hello Bob,
Line drawing doesn't work I will look around for solutions.
With Qkview - can I install that on each workstation and tell it to Run the
qtp program on the server on the server cpu? Or is this just A wrapper that
launches QTP to run locally?
Thanks.
Viet.
-----Original Message-----
From: powerh-l-bounces+vnguyen=wsboces.org at lists.sowder.com
[mailto:powerh-l-bounces+vnguyen=wsboces.org at lists.sowder.com] On Behalf Of
Deskin, Bob
Sent: Tuesday, September 18, 2007 9:27 AM
To: powerh-l at lists.sowder.com
Subject: [BULK] RE: Windows Server / Powerhouse
Importance: Low
Our developer suggests PuTTY along with setting the Windows (1252) code
page. Keep in mind that this is not directly supported since we do not test
with it. I can't say how well line drawing will work.
Another option might be QKView (available in 8.41E) looking at a mounted
drive with the PH install location. I believe there are some customers who
have tried that. Again we have not tested that specific scenario at this
time.
Bob
-----Original Message-----
From: powerh-l-bounces+bob.deskin=cognos.com at lists.sowder.com
[mailto:powerh-l-bounces+bob.deskin=cognos.com at lists.sowder.com] On Behalf
Of Peter Bateman
Sent: September 17, 2007 6:55 pm
To: powerh-l at lists.sowder.com
Subject: RE: Windows Server / Powerhouse
Hi Viet:
It is my understanding to run PowerHouse on Windows
you would need to be running on you local PC.
or be using something like CITRIX or Windows terminal
server.
You could also use Axiant Thin client. This would
be my preferred method if I can't run Powerhouse locally.
Regards,
Peter Bateman
>From: "Viet Nguyen" <VNguyen at wsboces.org>
>To: "power-l" <powerh-l at lists.sowder.com>
>Subject: Windows Server / Powerhouse
>Date: Mon, 17 Sep 2007 10:30:34 -0400
>
>Hi All,
>
>Is there anyone out there running Powerhouse on Windows using Telnet
>(crt terminal emulations) with about 100 users?
>
>If yes could you give me the hardware specs that you are running
>powerhouse on.
>
>Thank you .
>
>Viet.
>
>
>
>--
>= = = = = = = = = = = = = = = = = = = = = = = = = = = = Mailing list:
>powerh-l at lists.sowder.com
>Subscribe: "subscribe" in message body to
>powerh-l-request at lists.sowder.com
>Unsubscribe: "unsubscribe <password>" in message body
to
>powerh-l-request at lists.sowder.com
>http://lists.sowder.com/mailman/listinfo/powerh-l
>This list is closed, thus to post to the list you must be a subscriber.
>Add 'site:lists.sowder.com powerh-l' to your search terms to search the
>list archive at Google.
_________________________________________________________________
See Fireworks On Live Image Search
http://search.live.com/images/results.aspx?q=Fireworks&mkt=en-ca&FORM=SE
RNEP
--
= = = = = = = = = = = = = = = = = = = = = = = = = = = = Mailing list:
powerh-l at lists.sowder.com
Subscribe: "subscribe" in message body to
powerh-l-request at lists.sowder.com
Unsubscribe: "unsubscribe <password>" in message body to
powerh-l-request at lists.sowder.com
http://lists.sowder.com/mailman/listinfo/powerh-l
This list is closed, thus to post to the list you must be a subscriber.
Add 'site:lists.sowder.com powerh-l' to your search terms to search the list
archive at Google.
This message may contain privileged and/or confidential information.
If you have received this e-mail in error or are not the intended recipient,
you may not use, copy, disseminate or distribute it; do not open any
attachments, delete it immediately from your system and notify the sender
promptly by e-mail that you have done so. Thank you.
--
= = = = = = = = = = = = = = = = = = = = = = = = = = = = Mailing list:
powerh-l at lists.sowder.com
Subscribe: "subscribe" in message body to
powerh-l-request at lists.sowder.com
Unsubscribe: "unsubscribe <password>" in message body to
powerh-l-request at lists.sowder.com
http://lists.sowder.com/mailman/listinfo/powerh-l
This list is closed, thus to post to the list you must be a subscriber.
Add 'site:lists.sowder.com powerh-l' to your search terms to search the list
archive at Google.
--
= = = = = = = = = = = = = = = = = = = = = = = = = = = = Mailing list:
powerh-l at lists.sowder.com
Subscribe: "subscribe" in message body to
powerh-l-request at lists.sowder.com
Unsubscribe: "unsubscribe <password>" in message body to
powerh-l-request at lists.sowder.com
http://lists.sowder.com/mailman/listinfo/powerh-l
This list is closed, thus to post to the list you must be a subscriber.
Add 'site:lists.sowder.com powerh-l' to your search terms to search the list
archive at Google.
--
= = = = = = = = = = = = = = = = = = = = = = = = = = = = Mailing list:
powerh-l at lists.sowder.com
Subscribe: "subscribe" in message body to
powerh-l-request at lists.sowder.com
Unsubscribe: "unsubscribe <password>" in message body to
powerh-l-request at lists.sowder.com
http://lists.sowder.com/mailman/listinfo/powerh-l
This list is closed, thus to post to the list you must be a subscriber.
Add 'site:lists.sowder.com powerh-l' to your search terms to search the list
archive at Google.
More information about the powerh-l
mailing list