Error while executing QTP - Memory fault (invalid address).

[Syed Shahul Hameed Mustaffa]

Thank you Joe for your tip.
Very sorry for misleading you.

I lately found that the following statement gives me a different error
(after I commented out most of the code)
Statement:

request FOURTH-PASS  on calculation errors report

set lock file request

access *$UEV_SUBFILE_PATH\CW620SF4  link CLD_COMPUTER_NO to    &
                       CLD_COMPUTER_NO of COW_D  IN CWDB           &
                  and  CLD_COMPUTER_NO to                   &
                       CLD_COMPUTER_NO of COW_LOC_D IN CWDB
output COW_D IN CWDB update
item CM_MOVED_LDATE  = T_DATE

Error:

Executing request FOURTH-PASS ...
-------------------------------------------------------------------------------
The permanent subfile will be overwritten.
   File:  $UEV_SUBFILE_PATH\CW620SF8
-------------------------------------------------------------------------------
Variable size mismatch. key column #2
[1]
   File:  COW_D
     Linkitem:  CLD_COMPUTER_NO                  150648

Action Taken: Run terminated.
-------------------------------------------------------------------------------

I checked the tables and field sizes. Everything seems to be ok.

What could be the problem?

Regards,

SYED

On 12/13/05, Joe Boyle <atla38 at dsl.pipex.com> wrote:
>
> It's possible that some dodgy subfile components might be laying around
> and
> messing things up. Try 'dir /s c:\* CW620SF8*' and delete any unexpected
> subfile parts.
>
> You will need to this for all your disks, in my experience qtp/quiz can
> place these subfile parts in the strangest of places.
>
> Regards, Joe.
>
>
> -----Original Message-----
> From: powerh-l-bounces+atla38=dsl.pipex.com at lists.sowder.com
> [mailto:powerh-l-bounces+atla38=dsl.pipex.com at lists.sowder.com] On Behalf
> Of
> Joe Boyle
> Sent: 13 December 2005 14:52
> To: 'Syed Shahul Hameed Mustaffa'; 'PowerHouse List'
> Subject: RE: Error while executing QTP - Memory fault (invalid address).
>
> you could try using the full path, I saw a few problems like this a while
> back,
>
> subfile $UEV_SUBFILE_PATH\CW620SF8 keep include &
> $UEV_SUBFILE_PATH\CW620SF4
>
> Of course, the cynical among us ( you know who you are ) might suspect
> that
> subfile CW620SF4 is also empty - shame on you ;)
>
> Regards, Joe.
> ________________________________________
> From: powerh-l-bounces+atla38=dsl.pipex.com at lists.sowder.com
> [mailto:powerh-l-bounces+atla38=dsl.pipex.com at lists.sowder.com] On Behalf
> Of
> Syed Shahul Hameed Mustaffa
> Sent: 13 December 2005 14:34
> To: PowerHouse List
> Cc: Joe Boyle
> Subject: Re: Error while executing QTP - Memory fault (invalid address).
>
> Dear Gurus,
>
> The following code seems to generate the error
>
> subfile $UEV_SUBFILE_PATH\CW620SF8 keep include &
> CW620SF4
>
> The subfile CW620SF8seems to get created. But doesn't contain any data.
>
> Any help to resolve my issue will be appreciated.
> Regards,
> SYED
>
>
> On 12/12/05, Syed Shahul Hameed Mustaffa <sshahulgm at gmail.com > wrote:
> Sorry I felt that my question didn't reach anywhere. That's why I'm
> resending it.
> HoweverI have something to add.
>
> My initial judgement of code that generates the error seems to be wrong.
>
> It is from somewhere else. If you need the code file, I can send it.
>
> Thanks in advance.
> Regards,
> SYED.
>
>
> On 12/12/05, Syed Shahul Hameed Mustaffa <sshahulgm at gmail.com > wrote:
> Dear Gurus,
>
> Quick Intro: I've migrated a PH/MPEIX application to AXIANT4GL/WINDOWS
> (Thin
> Client).
>
> When I execute a QTP, I'm getting the following error message.
>
> ;---------------------------------------------------------------------------
> -------
> Executing request FOURTH-PASS ...
> *E* Memory fault (invalid address).
> *Fatal Error* *4780* Notify Cognos Customer Support
>
> ;---------------------------------------------------------------------------
> --------
>
> The following part of the code seems to generate this error.
>
> request FOURTH-PASS on calculation errors report
> set lock file request
> ;access *$UEV_SUBFILE_PATH\CW620SF4 link CLD_COMPUTER_NO to &
> ; CLD_COMPUTER_NO of COW_D IN CWDB &
> ; and CLD_COMPUTER_NO to &
> ; CLD_COMPUTER_NO of COW_LOC_D IN CWDB
> ;---- THE ABOVE STATEMENT IS RE-WRITTEN AS ONE RIGHT BELOW BY me
> access *$UEV_SUBFILE_PATH\CW620SF4 link CLD_COMPUTER_NO to &
> CLD_COMPUTER_NO of COW_LOC_D IN CWDB &
> and CLD_COMPUTER_NO OF CW620SF4 to &
> CLD_COMPUTER_NO of COW_D IN CWDB
> I'll appreciate any help to resolve this issue.
> Regards,
> SYED.
>
>
>
>
>
>
> --
> = = = = = = = = = = = = = = = = = = = = = = = = = = = =
> Mailing list: powerh-l at lists.sowder.com
> Subscribe: "subscribe" in message body to
> powerh-l-request at lists.sowder.com
> Unsubscribe: "unsubscribe &lt;password&gt;" in message body to
> powerh-l-request at lists.sowder.com
> http://lists.sowder.com/mailman/listinfo/powerh-l
> This list is closed, thus to post to the list you must be a subscriber.
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.sowder.com/pipermail/powerh-l/attachments/20051214/ee44e118/attachment.htm