Error while executing QTP - Memory fault (invalid address).

[Joe Boyle]

It's possible that some dodgy subfile components might be laying around and
messing things up. Try 'dir /s c:\* CW620SF8*' and delete any unexpected
subfile parts.  

You will need to this for all your disks, in my experience qtp/quiz can
place these subfile parts in the strangest of places.

Regards, Joe.


-----Original Message-----
From: powerh-l-bounces+atla38=dsl.pipex.com at lists.sowder.com
[mailto:powerh-l-bounces+atla38=dsl.pipex.com at lists.sowder.com] On Behalf Of
Joe Boyle
Sent: 13 December 2005 14:52
To: 'Syed Shahul Hameed Mustaffa'; 'PowerHouse List'
Subject: RE: Error while executing QTP - Memory fault (invalid address).

you could try using the full path, I saw a few problems like this a while
back,

subfile $UEV_SUBFILE_PATH\CW620SF8 keep include &
       $UEV_SUBFILE_PATH\CW620SF4

Of course, the cynical among us ( you know who you are ) might suspect that
subfile CW620SF4 is also empty - shame on you ;)

Regards, Joe. 
________________________________________
From: powerh-l-bounces+atla38=dsl.pipex.com at lists.sowder.com
[mailto:powerh-l-bounces+atla38=dsl.pipex.com at lists.sowder.com] On Behalf Of
Syed Shahul Hameed Mustaffa
Sent: 13 December 2005 14:34
To: PowerHouse List
Cc: Joe Boyle
Subject: Re: Error while executing QTP - Memory fault (invalid address).

Dear Gurus,
 
The following code seems to generate the error
 
subfile $UEV_SUBFILE_PATH\CW620SF8 keep include &
        CW620SF4
 
The subfile CW620SF8 seems to get created. But doesn't contain any data.
 
Any help to resolve my issue will be appreciated.
Regards,
SYED
 

On 12/12/05, Syed Shahul Hameed Mustaffa <sshahulgm at gmail.com > wrote: 
Sorry I felt that my question didn't reach anywhere. That's why I'm
resending it.
However I have something to add.
 
My initial judgement of code that generates the error seems to be wrong.
 
It is from somewhere else. If you need the code file, I can send it.
 
Thanks in advance.
Regards,
SYED.

 
On 12/12/05, Syed Shahul Hameed Mustaffa <sshahulgm at gmail.com > wrote: 
Dear Gurus,
 
Quick Intro: I've migrated a PH/MPEIX application to AXIANT4GL/WINDOWS (Thin
Client).
 
When I execute a QTP, I'm getting the following error message.
;---------------------------------------------------------------------------
-------
Executing request FOURTH-PASS ...
*E* Memory fault (invalid address).
*Fatal Error* *4780* Notify Cognos Customer Support
;---------------------------------------------------------------------------
--------
 
The following part of the code seems to generate this error.
 
request FOURTH-PASS  on calculation errors report
set lock file request
;access *$UEV_SUBFILE_PATH\CW620SF4  link CLD_COMPUTER_NO to    &
;                       CLD_COMPUTER_NO of COW_D  IN CWDB           &
;                  and  CLD_COMPUTER_NO to                   &
;                       CLD_COMPUTER_NO of COW_LOC_D IN CWDB
;---- THE ABOVE STATEMENT IS RE-WRITTEN AS ONE RIGHT BELOW BY me
access *$UEV_SUBFILE_PATH\CW620SF4   link CLD_COMPUTER_NO to    &
                       CLD_COMPUTER_NO of COW_LOC_D  IN CWDB           & 
                  and  CLD_COMPUTER_NO OF CW620SF4 to                   &
                       CLD_COMPUTER_NO of COW_D IN CWDB
I'll appreciate any help to resolve this issue.
Regards,
SYED.






-- 
= = = = = = = = = = = = = = = = = = = = = = = = = = = =
Mailing list: powerh-l at lists.sowder.com
Subscribe: "subscribe" in message body to powerh-l-request at lists.sowder.com
Unsubscribe: "unsubscribe &lt;password&gt;" in message body to
powerh-l-request at lists.sowder.com
http://lists.sowder.com/mailman/listinfo/powerh-l
This list is closed, thus to post to the list you must be a subscriber.