data in wrong file

[JOHAN Johan Koelewijn]

Allison,

VK-ORDER-KOP-NEW of example TR0051 is passed from a higher screen as master but it is LO-TOEW that makes the trouble...

Johan. 
> 
> 
> 
> -----Oorspronkelijk bericht-----
> Van: POWERH-L-ADMIN@LISTS.SOWDER.COM
> Datum: 11-6-04, 17:26
> Aan: JOHAN Johan Koelewijn; powerh-l@lists.sowder.com
> Onderwerp: RE: RE: data in wrong file
> 
> 
> Johan, hmmm, those shouldn't be a problem unless PH is really messed up internally.  
> Another possibility is that these items, or the whole record is passed to an external 
> routine where there is an inconsistency in what is being sent and what it thinks it 
> is receiving.
> 
> Are any of the examples below from records that are passed as masters from a higher 
> screen?
> 
> Allison Hamilton
> Senior Software Engineer
> Cognos Inc.
> 
> 
> -----Original Message-----
> From: JOHAN Johan Koelewijn [mailto:j.koelewijn@thegreenery.com]
> Sent: Friday, June 11, 2004 11:07 AM
> To: Hamilton, Allison; powerh-l@lists.sowder.com
> Subject: RE: RE: data in wrong file
> 
> 
> Allison,
> 
> There are just a few screens doing that and I already investigated them.
> 
> Screens using VK-ORDER-KOP-REC:
> 
> Screen VK2030:
>   let vk-order-kop-rec of vk-order-kop-nieuw = vk-order-kop-rec of vk-order-kop
> 
> this statement is part of an internal procedure that is called from several designer 
> procedures.
> 
> Screens using both VK-ORDER-KOP-REC and LO-TOEW-REC
> 
> Screen TR0050:
>    let vk-order-kop-rec of vk-order-kop-new = vk-order-kop-rec of vk-order-kop
>    let lo-toew-rec of lo-toew-new = lo-toew-rec of lo-toew
> 
> These are part of internal procedures that are called from the preupdate procedure
> 
> Screen TR0051:
>    let vk-order-kop-rec of vk-order-kop-new = vk-order-kop-rec of vk-order-kop
>    let lo-toew-rec of lo-toew-new    = lo-toew-rec of lo-toew
> 
> These are part of internal procedures that are called from the preupdate procedure
> 
> Qtp does not make use of those items at all.
> 
> Thanks,
> 
> Johan.
> > 
> > 
> > 
> > -----Oorspronkelijk bericht-----
> > Van: ALLISON.HAMILTON@COGNOS.COM
> > Datum: 11-6-04, 16:41
> > Aan: JOHAN Johan Koelewijn; powerh-l@lists.sowder.com
> > Onderwerp: RE: RE: data in wrong file
> > 
> > 
> > Johan, Do any screens move data using the VK-ORDER-KOP-REC or LO-TOEW-REC items?  
> If 
> > so, I'd take a look at those instances as the likely culprits.  PowerHouse would 
> > complain if it was actually trying to open one file thinking it's the other because 
> > it compares record sizes between the dictionary and the physical file and also 
> index 
> > counts, neither of which would pass in this case.  It would be hard to copy the 
> data 
> > from one to the other without being pretty specific except if you were using the 
> > above items.
> > 
> > Allison Hamilton
> > Senior Software Engineer
> Cognos Inc.
> 
> -----Original Message-----
> From: powerh-l-admin@lists.sowder.com
> [mailto:powerh-l-admin@lists.sowder.com]On Behalf Of JOHAN Johan
> Koelewijn
> Sent: Friday, June 11, 2004 10:04 AM
> To: Deskin, Bob; powerh-l@lists.sowder.com
> Subject: re: data in wrong file
> 
> 
> Bob,
> 
> These are 2 different layouts on two different physical files.
> Items have different names.
> The problem is that I can't narrow the problem to one particular screen. Therefore I 
> don't know if it's a subscreen that's causing problems.
> 
> Attached you will find the pdl's
> 
> Record VK-ORDER-KOP is written into LO-TOEW, so LO-TOEW contains wrong data.
> 
> Thanks,
> Johan. 
>   
>        This message may contain privileged and/or confidential information.  If you 
> have received this e-mail in error or are not the intended recipient, you may not 
> use, copy, disseminate or distribute it; do not open any attachments, delete it 
> immediately from your system and notify the sender promptly by e-mail that you have 
> done so.  Thank you. 
>  
> 
> 


= = = = = = = = = = = = = = = = = = = = = = = = = = = =
Mailing list: powerh-l@lists.sowder.com
Subscribe: "subscribe" in message body to powerh-l-request@lists.sowder.com
Unsubscribe: "unsubscribe <password>" in message body to powerh-l-request@lists.sowder.com
http://lists.sowder.com/mailman/listinfo/powerh-l
This list is closed, thus to post to the list you must be a subscriber.