Ask a guru - CM->NM & NM -> CM Switching???

[Art Bahrs]

Hi Dave & Bob :)
Ahhh...

Good answer :)  and thanks I will check with Lund on this... that helps
tho..

Bob gave me some good things to check out ... which I am looking into :) btw
Bob, we are on 8.19 on MPE/iX 5.5 with the proper patching for our
systems...

Thanks,
Art "still learning :) " Bahrs

----- Original Message -----
From: Dave Knispel <dave.knispel@frequencymarketing.com>
To: Art Bahrs <ABahrs@denkor.com>; Deskin, Bob <Bob.Deskin@Cognos.COM>;
PowerHouse Listserv (new) <powerh-l@lists.swau.edu>
Sent: Tuesday, April 25, 2000 8:23 AM
Subject: Re: Ask a guru - CM->NM & NM -> CM Switching???


> You should beware that much of SOS is using CM.  That is the fault of HP's
> measurement intrinsics still in CM.  If you look at that individual
> processess and their CM amount, most likely it is the SOS doing most of
> that.
>
> David Knispel
> dave.knispel@frequencymarketing.com
> Phone: 513-248-5029
> Fax: 513-248-2672
> ----- Original Message -----
> From: Art Bahrs <abahrs@denkor.com>
> To: Deskin, Bob <Bob.Deskin@Cognos.COM>; PowerHouse Listserv (new)
> <powerh-l@lists.swau.edu>
> Sent: Monday, April 24, 2000 12:22 PM
> Subject: Re: Ask a guru - CM->NM & NM -> CM Switching???
>
>
> > Hi Bob and All :)
> >    ok... I have a question for Cognos in general... over the weekend I
got
> a
> > page.... (I was the "On-Call" person this weekend) ... One of our
office's
> > was getting very bad response time (10 seconds or more after hitting the
> > return key on a HP 3000 979-200 with oodles of memory)
> >
> >    I logged in from the house and ran LPS's SOS... SOS reported the CM
to
> NM
> > switches as being "Excessive"  and showed that we had only Cognos and CI
> > things active on the machine...and I remembered the posts over the last
> > few/several days about QTP doing CM->NM switches... so my question is:
> Just
> > how much CM->NM & NM->CM switching do Cognos PowerHouse Products do?
and
> > umm... why?
> >
> > Art "Learning Powerhouse :) " Bahrs
> >
> > ----- Original Message -----
> > From: Deskin, Bob <Bob.Deskin@Cognos.COM>
> > To: PowerHouse Listserv (new) <powerh-l@lists.swau.edu>
> > Sent: Monday, April 24, 2000 8:50 AM
> > Subject: RE: Ask a guru - was: Suppressing subtotal lines
> >
> >
> > > For whatever reason, I have been asked to be the "guru" for ADT. So go
> > ahead
> > > and submit your questions and suggestions - we do have representation.
I
> > > don't know yet how the mechanics will all work, but I'll see all of
the
> > > submissions regardless. I suggest putting ADT, PowerHouse, or Axiant
in
> > the
> > > title so they're easy to find. Spread the word. Let's get lots of
> > > submissions.
> > >
> > > Regards
> > >
> > > Bob
> > >
> > > Bob Deskin
> > > PowerHouse Web Product Manager and Senior Product Advisor
> > > Application Development Tools, Cognos Inc.
> > > bob.deskin@cognos.com
> > > (613) 738-1338 ext 4205  FAX: (613) 228-3149
> > > 3755 Riverside Drive P.O. Box 9707 Stn. T, Ottawa ON K1G 4K9 CANADA
> > >
> > >
> > > -----Original Message-----
> > > From: Tim Ericson [mailto:tericson@denkor.com]
> > > Sent: April 19, 2000 3:11 PM
> > > To: Pickering, John (NORBORD); 'georgia miller'; PowerHouse Listserv
> > > (new)
> > > Subject: Re: Ask a guru - was: Suppressing subtotal lines
> > >
> > >
> > > John Pickering wrote:
> > >
> > > > The very least you can do is to express exactly these concerns to
> > > > Cognos. Use the "influence the gurus" web page to do so.
> > > >
> > > >>> Influence the gurus and win your Enterprise 2000 registration fee!
> > > >>> Send our team of Cognos experts your suggestions for topics to
> > > >>> cover in their presentations, and in the "Ask a Guru" panel
> > > >>> discussion. For details, visit:
> > > >>>
> > > >>> http://www.cognos.com/enterprise2000/guru_reg.html
> > >
> > >
> > > I've already done so, and hope that everyone else that feels the
> > > same will to!
> > >
> > >  +-------------------------------------------------------------------+
> > >   My mind is my own, as are my ideas and opinions.
> > >   My heart, body, and soul, however, all belong to others.       Tim.
> > >  +-------------------------------------------------------------------+
> > >   Tim Ericson            tericson      DenKor Dental Management Corp.
> > >   Sr. Systems Analyst     at denkor    503-526-4440 (my direct number)
> > >     (& Systems Manager)     dot com         http://www.denkor.com
> > >   Programming HP3000s since 1983!      Quality dental care since 1970!
> > >  +-------------------------------------------------------------------+
> > >   UDCs and Command Files:  http://www.denkor.com/hp3000/command_files
> > >  +-------------------------------------------------------------------+
> > >
> > >
> > > = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
=
> =
> > =
> > > Subscribe: "subscribe powerh-l" in message body to
> > majordomo@lists.swau.edu
> > > Unsubscribe: "unsubscribe powerh-l" in message to
> majordomo@lists.swau.edu
> > > This list is closed, thus to post to the list, you must be a
subscriber.
> > > = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
=
> =
> > =
> > > Subscribe: "subscribe powerh-l" in message body to
> > majordomo@lists.swau.edu
> > > Unsubscribe: "unsubscribe powerh-l" in message to
> majordomo@lists.swau.edu
> > > This list is closed, thus to post to the list, you must be a
subscriber.
> >
> > = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
=
> =
> > Subscribe: "subscribe powerh-l" in message body to
> majordomo@lists.swau.edu
> > Unsubscribe: "unsubscribe powerh-l" in message to
majordomo@lists.swau.edu
> > This list is closed, thus to post to the list, you must be a subscriber.
>

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Subscribe: "subscribe powerh-l" in message body to majordomo@lists.swau.edu
Unsubscribe: "unsubscribe powerh-l" in message to majordomo@lists.swau.edu
This list is closed, thus to post to the list, you must be a subscriber.