Compile problem

[Guy Werry]

Ok.  I like that approach too: if all else fails, turn the power off on
the stupid thing!
 
I know that in the dim, distant past when we were on MPE it had actual,
real "temporary" files which could really confuse things.  We would
often log off and then log back on to clear out our temporary files.
Ux doesn't have the same issues, because all of its files are permanent
... VMS might have something similar to MPE.
 
Guy.

________________________________

From: powerh-l-bounces+guy.werry=hbms.ca at lists.sowder.com
[mailto:powerh-l-bounces+guy.werry=hbms.ca at lists.sowder.com] On Behalf
Of G J
Sent: Thursday, January 22, 2009 11:43 AM
To: powerh-l at lists.sowder.com
Subject: RE: Compile problem


Hi Guy

This still doesn't solve the problem. You see what you are telling me is
something I have done for years.So I may have to reboot the system in
the hope that any default settings which may have changed would be
reset.


Thanks any way

________________________________

Subject: RE: Compile problem
Date: Thu, 22 Jan 2009 11:20:03 -0600
From: guy.werry at hbms.ca
To: powerh-l at lists.sowder.com


If you are trying to run the re-compiled screen and say "N" when asked
to build a new version, that SHOULD leave you in qdesign, IF you are
running interactively.
Then, if you type "GO" at the > prompt then that should execute your
MODIFIED code.  
 
Hope that helps ... unless I've mis-understood again.
 
Guy

________________________________

From: powerh-l-bounces+guy.werry=hbms.ca at lists.sowder.com
[mailto:powerh-l-bounces+guy.werry=hbms.ca at lists.sowder.com] On Behalf
Of G J
Sent: Thursday, January 22, 2009 11:05 AM
To: powerh-l at lists.sowder.com
Subject: RE: Compile problem



Hi Guy

I dont  think you understood what I meant. I already have a quick screen
compiled /built without the 
  "required" attached to employee_nin. When I recompile the source code,
unless I put a "Y" when I am asked to build a new version, the already
built screen should not reflect that change.

GJ 




________________________________

Subject: RE: Compile problem
Date: Thu, 22 Jan 2009 10:49:14 -0600
From: guy.werry at hbms.ca
To: powerh-l at lists.sowder.com


GJ,
 
Your original message was:
Hi to all. 
         Problem is when I recompile a quick screen without building ,
the recompile becomes the compiled screen.
Its as if an automatic build is performed. I am using Powerhouse
(7.10.G3) on OpenVMS (TM) Alpha Operating System, Version V7.3-1


Thanks.

I work on HP-Ux, so there may be some minor differences, but on Ux the
screen below DOES a build, because you've INSTRUCTED it to do so, with
the "BUILD" statement at the end.
Your screen is doing exactly what you told it to do.
 
On Ux what you have below will have a compiled screen named
EMPLOYEETEMP.qkc.  By any chance do you have your source file named as
EMPLOYEETEMP.qkc?  (or the VMS equivalent)  That WOULD cause you
problems!
 
Guy L. Werry
Senior Systems Analyst
Hudson Bay Mining & Smelting Co., Limited. 



________________________________

From: powerh-l-bounces+guy.werry=hbms.ca at lists.sowder.com
[mailto:powerh-l-bounces+guy.werry=hbms.ca at lists.sowder.com] On Behalf
Of G J
Sent: Thursday, January 22, 2009 10:41 AM
To: powerh-l at lists.sowder.com
Subject: Compile problem



SCREEN EMPLOYEETEMP
FILE EMPLOYEE


FIELD EMPLOYEE-NIN OF EMPLOYEE REQUIRED 

FIELD SURNAME OF EMPLOYEE 
FIELD FIRST-NAME OF EMPLOYEE ;REQUIRED ID SAME
FIELD MIDDLE-NAME OF EMPLOYEE ID SAME


BUILD



________________________________

Windows Live(tm) Hotmail(r):...more than just e-mail. Check it out.
<http://windowslive.com/explore?ocid=TXT_TAGLM_WL_t2_hm_justgotbetter_ex
plore_012009>  The information in this e-mail and any attachments is
confidential and may be subject to legal professional privilege. It is
intended solely for the attention and use of the named addressee(s). If
you are not the intended recipient, or person responsible for delivering
this information to the intended recipient, please notify the sender
immediately. Unless you are the intended recipient or his/her
representative you are not authorised to, and must not, read, copy,
distribute, use or retain this message or any part of it.

________________________________

Windows Live(tm): E-mail. Chat. Share. Get more ways to connect. Check
it out.
<http://windowslive.com/explore?ocid=TXT_TAGLM_WL_t2_allup_explore_01200
9>  The information in this e-mail and any attachments is confidential
and may be subject to legal professional privilege. It is intended
solely for the attention and use of the named addressee(s). If you are
not the intended recipient, or person responsible for delivering this
information to the intended recipient, please notify the sender
immediately. Unless you are the intended recipient or his/her
representative you are not authorised to, and must not, read, copy,
distribute, use or retain this message or any part of it.

________________________________

Windows Live(tm) Hotmail(r)...more than just e-mail. See how it works.
<http://windowslive.com/howitworks?ocid=TXT_TAGLM_WL_t2_hm_justgotbetter
_howitworks_012009>  

The information in this e-mail and any attachments is confidential and may be subject to legal professional privilege. It is intended solely for the attention and use of the named addressee(s). If you are not the intended recipient, or person responsible for delivering this information to the intended recipient, please notify the sender immediately. Unless you are the intended recipient or his/her representative you are not authorised to, and must not, read, copy, distribute, use or retain this message or any part of it.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.sowder.com/pipermail/powerh-l/attachments/20090122/b8379987/attachment-0001.htm