Fatal error 635

[Bruin, J.M. (Mark) de]

Hi there,
 
on our systems the following quota are set:
 
Maxjobs:         0  Fillm:       200  Bytlm:        64000
Maxacctjobs:     0  Shrfillm:      0  Pbytlm:           0
Maxdetach:       0  BIOlm:     12000  JTquota:       8192
Prclm:          10  DIOlm:       250  WSdef:         2000
Prio:            4  ASTlm:       250  WSquo:         4000
Queprio:         0  TQElm:       200  WSextent:     16384
CPU:        (none)  Enqlm:      2000  Pgflquo:     500000
 
and we do not have the fatal errors anymore since quite some time now.
Note the red values, those are significantly lower on your system.
 
Regards,
 
Mark


________________________________

	From: powerh-l-bounces+mark.debruin=tno.nl at lists.sowder.com
[mailto:powerh-l-bounces+mark.debruin=tno.nl at lists.sowder.com] On Behalf
Of De Meulenaere Patrick
	Sent: Monday, May 21, 2007 15:46
	To: Joe Boyle; powerh-l at lists.sowder.com
	Subject: RE: Fatal error 635
	
	
	Hello,
	 
	I changed my quotas but I still have the same error
	 
	These are the values now :
	 
	Maxjobs: 0 Fillm: 350 Bytlm: 360000

	Maxacctjobs: 0 Shrfillm: 0 Pbytlm: 0

	Maxdetach: 0 BIOlm: 300 JTquota: 8000

	Prclm: 8 DIOlm: 150 WSdef: 10000

	Prio: 2 ASTlm: 500 WSquo: 16000

	Queprio: 0 TQElm: 20 WSextent: 960000

	CPU: (none) Enqlm: 3000 Pgflquo: 3200000

	Patrick


________________________________

	From: Joe Boyle [mailto:atla38 at dsl.pipex.com] 
	Sent: woensdag 16 mei 2007 16:27
	To: De Meulenaere Patrick; powerh-l at lists.sowder.com
	Subject: RE: Fatal error 635
	
	

	Whooooops, the Google option is actually 'site:lists.sowder.com
powerh-l *635*'; the link below is simply a URL to the list archives :-)

	 

	
________________________________


	From: powerh-l-bounces+atla38=dsl.pipex.com at lists.sowder.com
[mailto:powerh-l-bounces+atla38=dsl.pipex.com at lists.sowder.com] On
Behalf Of Joe Boyle
	Sent: 16 May 2007 15:07
	To: 'De Meulenaere Patrick'; powerh-l at lists.sowder.com
	Subject: RE: Fatal error 635

	 

	I originally found the comment below by Googling page
'http://lists.sowder.com/pipermail/powerh-l/' and selecting the May 2001
entry

	 

	
________________________________


	From: Joe Boyle [mailto:atla38 at dsl.pipex.com] 
	Sent: 16 May 2007 14:12
	To: 'De Meulenaere Patrick'; 'powerh-l at lists.sowder.com'
	Subject: RE: Fatal error 635

	 

	I have the comments below in the notes from an old email, hope
it helps,

	 

	>I have long running QUICK screen, working with RMS files on
ALPHA 

	>OPEN/VMS. My PowerHouse is 7.10G1. The processing is quite
complicated 

	>and is started on 4th screen level.

	>Some time QUICK finish O.K. but if I run it on a huge amount of
data I 

	>get

	> 

	>*Fatal Error *635* Notify ..........

	> 

	> and OS prompt. 

	 

	Definitely look at quotas.

	I've seen this, and it's virtually impossible to finally nail
down: telephone support (UK) spent a lot of time (& several upgrades)
trying - incidence is now very low, but it still happens occasionally.

	 

	Raise UAF quotas: WSdef/quo/extent & PGflquota - I've got
2k/4k/16k & 100k, but my screen depth is less than yours. The WS quotas
do seem to matter, although they really shouldn't. Note also that the
VIRTUALPAGECNT system parameter is effectively an upper bound for
PGflquota, so be prepared to raise that too. The WS system parameters
should be out of sight already on a well configured system (see
recommendations for backup).

	 

	I'd also recommend upgrading to 710G3/4 - I'm on G3 which
significantly reduced the incidence of the problem.

	 

	 

	
________________________________


	From: powerh-l-bounces+atla38=dsl.pipex.com at lists.sowder.com
[mailto:powerh-l-bounces+atla38=dsl.pipex.com at lists.sowder.com] On
Behalf Of De Meulenaere Patrick
	Sent: 16 May 2007 13:42
	To: powerh-l at lists.sowder.com
	Subject: RE: Fatal error 635

	 

	 

	_____________________________________________ 
	From:   De Meulenaere Patrick  
	Sent:   woensdag 16 mei 2007 10:45 
	To:     'powerh-l at lists.sowder.com' 
	Subject:        Fatal error 635 

	Hello, 

	We have a problem with the execution of a ghost program . We get
a *Fatal Error* *635* Notify Cognos Customer Support 
	Did someone get this error before ? 

	We are working with Powerhouse version 7.10G1 and open vms
V7.3-2 

	Thanks, 

	Patrick 

	Patrick De Meulenaere 
	Glavinfo Powerhouse 
	Development center 

	 


This e-mail and its contents are subject to the DISCLAIMER at http://www.tno.nl/disclaimer/email.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.sowder.com/pipermail/powerh-l/attachments/20070521/41b9ff4a/attachment.html