132 Columns in Quick on HP3000
Joe Boyle
atla38 at dsl.pipex.com
Fri Aug 17 06:50:23 CDT 2007
You could even try assigning a logical with a time stamp or userid included
to the qklist.txt filename ( again using setsystemval), this way you could
keep track of multiple user list output files.
_____
From: powerh-l-bounces+atla38=dsl.pipex.com at lists.sowder.com
[mailto:powerh-l-bounces+atla38=dsl.pipex.com at lists.sowder.com] On Behalf Of
Joe Boyle
Sent: 17 August 2007 12:37
To: 'Thomson, Martyn EDUC:EX'
Cc: powerh-l at lists.sowder.com
Subject: RE: 132 Columns in Quick on HP3000
how about setting up a dummy/stopped print queue and then observe the file
name that PH uses for the list output file; then do something like :
procedure designer dumy
begin
if not setsystemval ("sys$print", dummy_q, logical, "lnm$proc"/"lnm$job")
then "error setting q"
push list
copy "list output filespec" [holddir]
del "list output filespec"
if not setsystemval ("sys$print", default_q, logical, "lnm$proc"/"lnm$job"))
then "error resetting q"
print [holddir]output filespec
end
actionmenu label "LaserPrint" action designer dumy menukey "L"
procedure designer on_wide
run command "set queue/form=landscape_60 SYS$PRINT"
The setsystemval call should set the logical in the current process.
regards, Joe.
-----Original Message-----
From: Joe Boyle [mailto:atla38 at dsl.pipex.com]
Sent: 17 August 2007 00:34
To: 'Thomson, Martyn EDUC:EX'
Subject: RE: 132 Columns in Quick on HP3000
You could try stopping/stalling the queue and then editing the file to see
if it actually contains a 132 wide screen shot, if not, (and assuming the
chap is on a desktop) tell the chap to paste the printscreen contents into
word and select print :(
-----Original Message-----
From: powerh-l-bounces+atla38=dsl.pipex.com at lists.sowder.com
[mailto:powerh-l-bounces+atla38=dsl.pipex.com at lists.sowder.com] On Behalf Of
Thomson, Martyn EDUC:EX
Sent: 16 August 2007 22:33
To: powerh-l at lists.sowder.com
Subject: RE: 132 Columns in Quick on HP3000
I have a related question:
I have a 132 column screen and the client would like the screen print to
show 132 columns. The default form for SYS$PRINT is an 80 column form. So I
tried putting a designer command at the start of the command list to set the
queue to a 132 column landscape form -
actionmenu label "LaserPrint" action designer on_wide, list, designer
off_wide menukey "L"
procedure designer on_wide
run command "set queue/form=landscape_60 SYS$PRINT"
Stepping through in debug I can see in another session that the form has
changed but it has no effect on the LIST action which prints 80 columns,
truncating the rest. I have full privileges on the queue and can change the
form in DCL.
Can anyone explain why this doesn't work, and/or suggest an alternative
approach?
TIA, Martyn
OpenVMS Alpha V8.2
PH 7.10G1
Oracle Rdb V7.2-111
-----Original Message-----
From: powerh-l-bounces+martyn.thomson=gov.bc.ca at lists.sowder.com
[mailto:powerh-l-bounces+martyn.thomson=gov.bc.ca at lists.sowder.com]On
Behalf Of Deskin, Bob
Sent: June 21, 2007 2:04 PM
To: Lowe, Chuck J; powerh-l at lists.sowder.com
Subject: RE: 132 Columns in Quick on HP3000
Use the FROM and TO options of the SCREEN statement.
Bob
-----Original Message-----
From: powerh-l-bounces+bob.deskin=cognos.com at lists.sowder.com
[mailto:powerh-l-bounces+bob.deskin=cognos.com at lists.sowder.com] On
Behalf Of Lowe, Chuck J
Sent: June 21, 2007 4:29 PM
To: powerh-l at lists.sowder.com
Subject: 132 Columns in Quick on HP3000
We need to use a quick screen with 132 columns. The ref books do not
exactly explain this.
We are on PowerHouse version 8.49D1 and HP MPE/iX ver C.70.00. And we
are using Minisoft ver 5.3 that support 132 columns (and more). I
submitted this question to Cognoise site and one person answered "I know
Quick supports 132 columns... I think there is a SET statement for it"
Does anyone know for sure?
Thanks in advanced!
Chuck Lowe
Quest Diagnostics
Senior Programmer Analyst
Office (610) 650-6679
Fax (610) 650-2114
========================================================================
======
The contents of this message, together with any attachments, are
intended only for the use of the person(s) to which they are addressed
and may contain confidential and/or privileged information. Further, any
medical information herein is confidential and protected by law. It is
unlawful for unauthorized persons to use, review, copy, disclose, or
disseminate confidential medical information. If you are not the
intended recipient, immediately advise the sender and delete this
message and any attachments. Any distribution, or copying of this
message, or any attachment, is prohibited.
========================================================================
======
--
= = = = = = = = = = = = = = = = = = = = = = = = = = = =
Mailing list: powerh-l at lists.sowder.com
Subscribe: "subscribe" in message body to
powerh-l-request at lists.sowder.com
Unsubscribe: "unsubscribe <password>" in message body to
powerh-l-request at lists.sowder.com
http://lists.sowder.com/mailman/listinfo/powerh-l
This list is closed, thus to post to the list you must be a subscriber.
Add 'site:lists.sowder.com powerh-l' to your search terms to search the
list archive at Google.
This message may contain privileged and/or confidential information.
If you have received this e-mail in error or are not the intended recipient,
you may not use, copy, disseminate or distribute it; do not open any
attachments, delete it immediately from your system and notify the sender
promptly by e-mail that you have done so. Thank you.
--
= = = = = = = = = = = = = = = = = = = = = = = = = = = =
Mailing list: powerh-l at lists.sowder.com
Subscribe: "subscribe" in message body to
powerh-l-request at lists.sowder.com
Unsubscribe: "unsubscribe <password>" in message body to
powerh-l-request at lists.sowder.com
http://lists.sowder.com/mailman/listinfo/powerh-l
This list is closed, thus to post to the list you must be a subscriber.
Add 'site:lists.sowder.com powerh-l' to your search terms to search the list
archive at Google.
--
= = = = = = = = = = = = = = = = = = = = = = = = = = = =
Mailing list: powerh-l at lists.sowder.com
Subscribe: "subscribe" in message body to
powerh-l-request at lists.sowder.com
Unsubscribe: "unsubscribe <password>" in message body to
powerh-l-request at lists.sowder.com
http://lists.sowder.com/mailman/listinfo/powerh-l
This list is closed, thus to post to the list you must be a subscriber.
Add 'site:lists.sowder.com powerh-l' to your search terms to search the list
archive at Google.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.sowder.com/pipermail/powerh-l/attachments/20070817/e161cfa8/attachment-0001.html
More information about the powerh-l
mailing list