132 Columns in Quick on HP3000

[Bruin, J.M. (Mark) de]

Did you check the form on the JOB itself (initiated by the list
command)?
The LIST could be performed within de CURRENT QUICK session, while the
run command for the queue form is in the SUBPROCESS
Therefor it could be that the form on the queue changes but that the
LIST command uses the default form.

It is just a thought, I didn't try it out.

Mark

> -----Original Message-----
> From: powerh-l-bounces+mark.debruin=tno.nl at lists.sowder.com 
> [mailto:powerh-l-bounces+mark.debruin=tno.nl at lists.sowder.com]
>  On Behalf Of Thomson, Martyn EDUC:EX
> Sent: Thursday, August 16, 2007 23:33
> To: powerh-l at lists.sowder.com
> Subject: RE: 132 Columns in Quick on HP3000
> 
> I have a related question: 
> 
> I have a 132 column screen and the client would like the 
> screen print to show 132 columns. The default form for 
> SYS$PRINT is an 80 column form. So I tried putting a designer 
> command at the start of the command list to set the queue to 
> a 132 column landscape form -
> 
> actionmenu label "LaserPrint" action designer on_wide, list, 
> designer off_wide    menukey "L" 
> 
> procedure designer on_wide 
>    run command "set queue/form=landscape_60 SYS$PRINT" 
> 
> Stepping through in debug I can see in another session that 
> the form has changed but it has no effect on the LIST action 
> which prints 80 columns, truncating the rest. I have full 
> privileges on the queue and can change the form in DCL.
> 
> Can anyone explain why this doesn't work, and/or suggest an 
> alternative approach? 
> TIA, Martyn 
> 
> OpenVMS Alpha V8.2
> PH 7.10G1
> Oracle Rdb V7.2-111 
> 
> -----Original Message-----
> From: powerh-l-bounces+martyn.thomson=gov.bc.ca at lists.sowder.com
> [mailto:powerh-l-bounces+martyn.thomson=gov.bc.ca at lists.sowder.com]On
> Behalf Of Deskin, Bob
> Sent: June 21, 2007 2:04 PM
> To: Lowe, Chuck J; powerh-l at lists.sowder.com
> Subject: RE: 132 Columns in Quick on HP3000 
> 
> 
> Use the FROM and TO options of the SCREEN statement. 
> 
> Bob 
> 
> -----Original Message-----
> From: powerh-l-bounces+bob.deskin=cognos.com at lists.sowder.com
> [mailto:powerh-l-bounces+bob.deskin=cognos.com at lists.sowder.co
> m] On Behalf Of Lowe, Chuck J
> Sent: June 21, 2007 4:29 PM
> To: powerh-l at lists.sowder.com
> Subject: 132 Columns in Quick on HP3000 
> 
> 
> 
> We need to use a quick screen with 132 columns. The ref books 
> do not exactly explain this. 
> We are on PowerHouse version 8.49D1 and HP MPE/iX ver 
> C.70.00. And we are using Minisoft ver 5.3 that support 132 
> columns (and more). I submitted this question to Cognoise 
> site and one person answered "I know Quick supports 132 
> columns...  I think there is a SET statement for it" 
> Does anyone know for sure? 
> 
> Thanks in advanced! 
> 
> Chuck Lowe
> Quest Diagnostics
> Senior Programmer Analyst
> Office (610) 650-6679 
> Fax    (610) 650-2114 
> 
> 
> ==============================================================
> ==========
> ======
> The contents of this message, together with any attachments, 
> are intended only for the use of the person(s) to which they 
> are addressed and may contain confidential and/or privileged 
> information. Further, any medical information herein is 
> confidential and protected by law. It is unlawful for 
> unauthorized persons to use, review, copy, disclose, or 
> disseminate confidential medical information. If you are not 
> the intended recipient, immediately advise the sender and 
> delete this message and any attachments. Any distribution, or 
> copying of this message, or any attachment, is prohibited. 
> ==============================================================
> ==========
> ====== 
> 
> 
> --
> = = = = = = = = = = = = = = = = = = = = = = = = = = = = 
> Mailing list: powerh-l at lists.sowder.com
> Subscribe: "subscribe" in message body to 
> powerh-l-request at lists.sowder.com
> Unsubscribe: "unsubscribe <password>" in 
> message body to powerh-l-request at lists.sowder.com 
> http://lists.sowder.com/mailman/listinfo/powerh-l
> This list is closed, thus to post to the list you must be a 
> subscriber. 
> Add 'site:lists.sowder.com powerh-l' to your search terms to 
> search the list archive at Google. 
>   
>      This message may contain privileged and/or confidential 
> information.  If you have received this e-mail in error or 
> are not the intended recipient, you may not use, copy, 
> disseminate or distribute it; do not open any attachments, 
> delete it immediately from your system and notify the sender 
> promptly by e-mail that you have done so.  Thank you.
> 
> --
> = = = = = = = = = = = = = = = = = = = = = = = = = = = = 
> Mailing list: powerh-l at lists.sowder.com
> Subscribe: "subscribe" in message body to 
> powerh-l-request at lists.sowder.com
> Unsubscribe: "unsubscribe <password>" in 
> message body to powerh-l-request at lists.sowder.com 
> http://lists.sowder.com/mailman/listinfo/powerh-l
> This list is closed, thus to post to the list you must be a 
> subscriber. 
> Add 'site:lists.sowder.com powerh-l' to your search terms to 
> search the list archive at Google. 
> 
> 
> --
> = = = = = = = = = = = = = = = = = = = = = = = = = = = = 
> Mailing list: powerh-l at lists.sowder.com
> Subscribe: "subscribe" in message body to 
> powerh-l-request at lists.sowder.com
> Unsubscribe: "unsubscribe <password>" in 
> message body to powerh-l-request at lists.sowder.com 
> http://lists.sowder.com/mailman/listinfo/powerh-l
> This list is closed, thus to post to the list you must be a 
> subscriber.
> Add 'site:lists.sowder.com powerh-l' to your search terms to 
> search the list archive at Google.
> 

This e-mail and its contents are subject to the DISCLAIMER at http://www.tno.nl/disclaimer/email.html