*d* The occurrence count exceeds the defined occurrence for
this file.
roger32909 at bellsouth.net
roger32909 at bellsouth.net
Mon Sep 26 10:32:41 CDT 2005
Here is the CLUSTER statement unchanged from the beginning:
CLUSTER OCCURS WITH XYZ-LINES
Were it up to me, I would have upgraded long ago and would have Cognos support.
>
> From: "Joe Boyle" <atla38 at dsl.pipex.com>
> Date: 2005/09/26 Mon AM 09:53:57 EDT
> To: <roger32909 at bellsouth.net>, <powerh-l at lists.sowder.com>
> Subject: RE: RE: *d* The occurrence count exceeds the defined occurrence for this file.
>
> you don't say if you are allowing a default cluster statement to be built,
> and to be honest I assumed that the cluster statement may have been the
> cause; I suspected that the file may have not had an occurs option when the
> screen was built originally.
>
> Assuming that the cluster is comprised of standard default syntax, I think
> you may well have a bug as suggested by Chris, and probably need to upgrade
> to a later 7.10.G version.
>
> I would guess the *d* is for data, have you asked Cognos to look in their
> bug base for known issues ?
>
> Regards, Joe.
>
>
> -----Original Message-----
> From: roger32909 at bellsouth.net [mailto:roger32909 at bellsouth.net]
> Sent: 26 September 2005 14:19
> To: Joe Boyle; powerh-l at lists.sowder.com
> Subject: Re: RE: *d* The occurrence count exceeds the defined occurrence for
> this file.
>
> I am familar with the *W* warning and the *E* error messages, but what is a
> "*d*" message?
>
> Anyhow, here are the default procedures:
>
> > BUILD LIST DETAIL
> *W* Update on linked screen may bypass PREUPDATE/UPDATE/POSTUPDATE
> procedures.
> > PROCEDURE APPEND
> > BEGIN
> > ACCEPT M-ID OF XYZ-LINES
> > DISPLAY V-ID OF MMENTS
> > DISPLAY BL_DATE OF MMENTS
> > ACCEPT G_LINE OF XYZ-LINES
> > ACCEPT P_S OF XYZ-LINES
> > EDIT T-P_S
> > DISPLAY M-QTY OF MMENTS
> > DISPLAY L_LINK OF XYZ-LINES
> > DISPLAY T-OPEN-BAL
> > DISPLAY W-O
> > ACCEPT OC-AMT OF XYZ-LINES
> > DISPLAY D-USD-LABEL
> > DISPLAY D-USD-AMOUNT
> > END
> > PROCEDURE ENTRY
> > BEGIN
> > DISPLAY X-TIME
> > DISPLAY X-FILLER3
> > DISPLAY R-ID OF XYZ-HEADER
> > DISPLAY C-CODE OF XYZ-HEADER
> > DISPLAY V-INV OF XYZ-HEADER
> > DISPLAY DESCRIPTION OF CURRENCY
> > DISPLAY NAME OF CPARTS
> > DISPLAY OC-AMOUNT OF XYZ-HEADER
> > DISPLAY I-DATE OF XYZ-HEADER
> > DISPLAY D-DATE OF XYZ-HEADER
> > DISPLAY V-BAL OF XYZ-HEADER
> > DISPLAY D-STATUS
> > DISPLAY POST-PER OF XYZ-HEADER
> > DISPLAY T-REMAINING
> > DISPLAY SEL-FOR-PAY-DISP
> > DISPLAY D-PAY-MET
> > DISPLAY CT-ID OF VP-HEADER
> > DISPLAY D-ON
> > DISPLAY T-DATE OF VP-HEADER
> > DISPLAY CURRENCY OF XYZ-HEADER
> > FOR XYZ-LINES
> > BEGIN
> > PERFORM APPEND
> > END
> > END
> > PROCEDURE PATH
> > BEGIN
> > LET PATH = 1
> > END
> > PROCEDURE FIND
> > BEGIN
> > GET XYZ-HEADER VIA VI-ID USING &
> > T-VI-ID
> > END
> > PROCEDURE DETAIL FIND
> > BEGIN
> > FOR MISSING XYZ-LINES
> > BEGIN
> > GET XYZ-LINES OPTIONAL
> > GET MMENT-EST OPTIONAL
> > END
> > END
> > PROCEDURE UPDATE
> > BEGIN
> > LOCK MMENT-EST FILE , MMENT-EST-AUDIT FILE , &
> > XYZ-HEADER FILE , XYZ-LINES FILE
> > PUT XYZ-HEADER
> > FOR XYZ-LINES
> > BEGIN
> > PUT XYZ-LINES
> > PUT MMENT-EST
> > END
> > UNLOCK ALL FILE
> > END
> > ALLDONE
>
> >
> > From: "Joe Boyle" <atla38 at dsl.pipex.com>
> > Date: 2005/09/23 Fri PM 05:30:50 EDT
> > To: <roger32909 at bellsouth.net>, <powerh-l at lists.sowder.com>
> > Subject: RE: *d* The occurrence count exceeds the defined occurrence for
> this file.
> >
> > Did you allow the screen to build a default cluster ?
> > What is the full syntax displayed when you do a 'build list detail' ?
> >
> > Regards, Joe.
> >
> > -----Original Message-----
> > From: powerh-l-bounces+atla38=dsl.pipex.com at lists.sowder.com
> > [mailto:powerh-l-bounces+atla38=dsl.pipex.com at lists.sowder.com] On Behalf
> Of
> > roger32909 at bellsouth.net
> > Sent: 23 September 2005 20:22
> > To: powerh-l at lists.sowder.com
> > Subject: *d* The occurrence count exceeds the defined occurrence for this
> > file.
> >
> > OpenVMS V7.3-2 on an Alpha, Q D E S I G N (7.10.G1)
> > Copyright 1998 COGNOS INC. (ALPHA)
> > Licensed PH-AXP-DEVELOPMENT
> >
> > Have a detail file in a screen that occurs 5 times
> > FILE XYZ-LINES DETAIL OCCURS 5 TIMES CACHE 255 NOITEMS
> >
> > In testing a screen, I just updated 9 detail records and received this
> > message which I have never
> > seen before:
> >
> > *d* The occurrence count exceeds the defined occurrence for this file.
> >
> > I looked at the 9 records in QUIZ and everything appears to be normal.
> When
> > I do a QUICK (F)ind,
> > all 9 records show up normally.
> >
> > But surely a message like this would alarm a user. Anybody have a clue?
> >
> > --
> > = = = = = = = = = = = = = = = = = = = = = = = = = = = =
> > Mailing list: powerh-l at lists.sowder.com
> > Subscribe: "subscribe" in message body to
> powerh-l-request at lists.sowder.com
> > Unsubscribe: "unsubscribe <password>" in message body to
> > powerh-l-request at lists.sowder.com
> > http://lists.sowder.com/mailman/listinfo/powerh-l
> > This list is closed, thus to post to the list you must be a subscriber.
> >
> >
>
>
More information about the powerh-l
mailing list