*d* The occurrence count exceeds the defined occurrence forthis file.

[Findlay, Colin]

Isn't this just a "design error" as defined on p.58 of the 8.3 manual
(and in every QUICK manual since the year dot) ?

"Severe Errors
Any of the following error conditions are considered Severe errors:
* QUICK executes a SEVERE verb
* QUICK detects a screen design error (*d* error)
* QUICK detects a design inconsistency (e.g., the file definition in the
dictionary does not
match the physical file)
* an internal error occurs..."

-----Original Message-----
From: powerh-l-bounces+colin.findlay=fmglobal.com at lists.sowder.com
[mailto:powerh-l-bounces+colin.findlay=fmglobal.com at lists.sowder.com] On
Behalf Of Joe Boyle
Sent: 26 September 2005 14:54
To: roger32909 at bellsouth.net; powerh-l at lists.sowder.com
Subject: RE: RE: *d* The occurrence count exceeds the defined occurrence
forthis file.


you don't say if you are allowing a default cluster statement to be
built,
and to be honest I assumed that the cluster statement may have been the
cause; I suspected that the file may have not had an occurs option when
the
screen was built originally.

Assuming that the cluster is comprised of standard default syntax, I
think
you may well have a bug as suggested by Chris, and probably need to
upgrade
to a later 7.10.G version.

I would guess the *d* is for data, have you asked Cognos to look in
their
bug base for known issues ?

Regards, Joe.


-----Original Message-----
From: roger32909 at bellsouth.net [mailto:roger32909 at bellsouth.net] 
Sent: 26 September 2005 14:19
To: Joe Boyle; powerh-l at lists.sowder.com
Subject: Re: RE: *d* The occurrence count exceeds the defined occurrence
for
this file.

I am familar with the *W* warning and the *E* error messages, but what
is a
"*d*" message?

Anyhow, here are the default procedures:

> BUILD LIST DETAIL
*W* Update on linked screen may bypass PREUPDATE/UPDATE/POSTUPDATE
procedures.
> PROCEDURE APPEND
>   BEGIN
>     ACCEPT M-ID OF XYZ-LINES
>     DISPLAY V-ID OF MMENTS
>     DISPLAY BL_DATE OF MMENTS
>     ACCEPT G_LINE OF XYZ-LINES
>     ACCEPT P_S OF XYZ-LINES
>     EDIT T-P_S
>     DISPLAY M-QTY OF MMENTS
>     DISPLAY L_LINK OF XYZ-LINES
>     DISPLAY T-OPEN-BAL
>     DISPLAY W-O
>     ACCEPT OC-AMT OF XYZ-LINES
>     DISPLAY D-USD-LABEL
>     DISPLAY D-USD-AMOUNT
>     END
> PROCEDURE ENTRY
>   BEGIN
>     DISPLAY X-TIME
>     DISPLAY X-FILLER3
>     DISPLAY R-ID OF XYZ-HEADER
>     DISPLAY C-CODE OF XYZ-HEADER
>     DISPLAY V-INV OF XYZ-HEADER
>     DISPLAY DESCRIPTION OF CURRENCY
>     DISPLAY NAME OF CPARTS
>     DISPLAY OC-AMOUNT OF XYZ-HEADER
>     DISPLAY I-DATE OF XYZ-HEADER
>     DISPLAY D-DATE OF XYZ-HEADER
>     DISPLAY V-BAL OF XYZ-HEADER
>     DISPLAY D-STATUS
>     DISPLAY POST-PER OF XYZ-HEADER
>     DISPLAY T-REMAINING
>     DISPLAY SEL-FOR-PAY-DISP
>     DISPLAY D-PAY-MET
>     DISPLAY CT-ID OF VP-HEADER
>     DISPLAY D-ON
>     DISPLAY T-DATE OF VP-HEADER
>     DISPLAY CURRENCY OF XYZ-HEADER
>     FOR XYZ-LINES
>       BEGIN
>         PERFORM APPEND
>         END
>     END
> PROCEDURE PATH
>   BEGIN
>     LET PATH = 1
>     END
> PROCEDURE FIND
>   BEGIN
>     GET XYZ-HEADER VIA VI-ID USING &
>           T-VI-ID
>     END
> PROCEDURE DETAIL FIND
>   BEGIN
>     FOR MISSING XYZ-LINES
>       BEGIN
>         GET XYZ-LINES OPTIONAL
>         GET MMENT-EST OPTIONAL
>         END
>     END
> PROCEDURE UPDATE
>   BEGIN
>     LOCK MMENT-EST FILE , MMENT-EST-AUDIT FILE , &
>           XYZ-HEADER FILE , XYZ-LINES FILE
>     PUT XYZ-HEADER
>     FOR XYZ-LINES
>       BEGIN
>         PUT XYZ-LINES
>         PUT MMENT-EST
>         END
>     UNLOCK ALL FILE
>     END
> ALLDONE

> 
> From: "Joe Boyle" <atla38 at dsl.pipex.com>
> Date: 2005/09/23 Fri PM 05:30:50 EDT
> To: <roger32909 at bellsouth.net>,  <powerh-l at lists.sowder.com>
> Subject: RE: *d* The occurrence count exceeds the defined occurrence
for
this file.
> 
> Did you allow the screen to build a default cluster ?
> What is the full syntax displayed when you do a 'build list detail' ?
> 
> Regards, Joe.
> 
> -----Original Message-----
> From: powerh-l-bounces+atla38=dsl.pipex.com at lists.sowder.com
> [mailto:powerh-l-bounces+atla38=dsl.pipex.com at lists.sowder.com] On
Behalf
Of
> roger32909 at bellsouth.net
> Sent: 23 September 2005 20:22
> To: powerh-l at lists.sowder.com
> Subject: *d* The occurrence count exceeds the defined occurrence for
this
> file.
> 
> OpenVMS V7.3-2 on an Alpha, Q D E S I G N   (7.10.G1)
> Copyright 1998 COGNOS INC. (ALPHA)
> Licensed PH-AXP-DEVELOPMENT 
> 
> Have a detail file in a screen that occurs 5 times
> FILE XYZ-LINES DETAIL OCCURS 5 TIMES CACHE 255 NOITEMS
> 
> In testing a screen, I just updated 9 detail records and received this
> message which I have never
> seen before:
> 
> *d* The occurrence count exceeds the defined occurrence for this file.
> 
> I looked at the 9 records in QUIZ and everything appears to be normal.
When
> I do a QUICK (F)ind,
> all 9 records show up normally.
> 
> But surely a message like this would alarm a user.  Anybody have a
clue?
> 
> -- 
> = = = = = = = = = = = = = = = = = = = = = = = = = = = =
> Mailing list: powerh-l at lists.sowder.com
> Subscribe: "subscribe" in message body to
powerh-l-request at lists.sowder.com
> Unsubscribe: "unsubscribe &lt;password&gt;" in message body to
> powerh-l-request at lists.sowder.com
> http://lists.sowder.com/mailman/listinfo/powerh-l
> This list is closed, thus to post to the list you must be a
subscriber.
> 
> 

-- 
= = = = = = = = = = = = = = = = = = = = = = = = = = = =
Mailing list: powerh-l at lists.sowder.com
Subscribe: "subscribe" in message body to
powerh-l-request at lists.sowder.com
Unsubscribe: "unsubscribe &lt;password&gt;" in message body to
powerh-l-request at lists.sowder.com
http://lists.sowder.com/mailman/listinfo/powerh-l
This list is closed, thus to post to the list you must be a subscriber.