Error with TERMINAL-GROUP qkgo

[Joe Boyle]

I also found the comments below, and as you are from the hp3000 platform you
might also find useful,

how to setup function keys as previously used on the HP3000 as below,

key 1   label "dfk1" data skip all, designer docd
key 2   label "shift" action and data shift lock


If the terminal emulator in use cannot emulate a hp terminal type, you can
use Gold n to invoke a given key n function. Or you can map commands from
the TIC screen.


If the terminal emulator can emulate a hp terminal type such as hp2392, it
is possible to get behaviour very similar to the hp3000.

Set the reflections terminal type to hp2392 and call the application as
follows, 
 
quick auto=mydfkqkg.qkg term=hp2392  

the F key buttons will now be enabled on the screen.

 
Used the lock syntax as below in order to hold a given level beyond a single
command,

key 1   data skip all, designer docd
key 1   level 2 data skip all, designer mf42
key 2   label "dfk2" action and data shift lock
key 3   level 2 action and data shift to 1 lock


be sure that the QKGO file has the field  Function Key Support Mode set to
Dynamic (2); this field can be found in the QKGO screen option  '07 Dynamic
Function'


Regards, Joe.


-----Original Message-----
From: powerh-l-bounces+atla38=dsl.pipex.com at lists.sowder.com
[mailto:powerh-l-bounces+atla38=dsl.pipex.com at lists.sowder.com] On Behalf Of
Elisabeth Corsten
Sent: 19 September 2005 17:03
To: Joe Boyle
Cc: powerh-l at lists.sowder.com
Subject: RE: Error with TERMINAL-GROUP qkgo

Super, Joe - that did it!

Thanks a lot
Elisabeth


Am Mo 19.09.2005 17:55 schrieb Joe Boyle <atla38 at dsl.pipex.com>:

> Just a thought, but you don't say if you have Cisam access; if not,
> you will
> have to set the axticrs (possibly AXTICRS) variable to point to the
> correct
> flat file equivalent which you will find in or below the qkgo folder
> in the
> PH folder,
> 
> e.g. AXTICRS=$PH_QKGO_LOCATION/resource/tic_vt200;export AXTICRS
> 
> above is a vt200 specific setup but there is probably a HP specific
> version.
> 
> Also, do you have the TERM environment variable set.
> 
> Regards, Joe.
> 
> 
> -----Original Message-----
> From: powerh-l-bounces+atla38=dsl.pipex.com at lists.sowder.com
> [mailto:powerh-l-bounces+atla38=dsl.pipex.com at lists.sowder.com] On
> Behalf Of
> Elisabeth Corsten
> Sent: 19 September 2005 15:31
> To: powerh-l at lists.sowder.com
> Cc: powerh-l at lists.sowder.com
> Subject: Error with TERMINAL-GROUP qkgo
> 
> Dear All,
>  
> migrating from MPE / IMAGE / KSAM to PH 843D under UX and Eloquence.
> 
> After some tricky installation issues (and help from the list and
> Cognos
> support) we now run Eloquence, PHD, PH components, and are happily
> compiling away.... QUIZ and QTP at least...the Qdesign part resists
> with
> the following:
> 
> No port information found.
> Terminal type=
> 
> so I enter: HP700/92
> 
> and up comes
> 
> *Error opening TERMINAL-GROUP qkgo file.
> 
> Yes, I have created a default QKGO including TIC files - I just can't
> find out what this error is telling me. Anyone come across that one
> before? Installation omittance again? Many thanks in advance!
>  
> Elisabeth Corsten-Weseloh
> EC Datentechnik Gmbh
> Appel, Germany
> 
> 
> 
> -- 
> = = = = = = = = = = = = = = = = = = = = = = = = = = = =
> Mailing list: powerh-l at lists.sowder.com
> Subscribe: "subscribe" in message body to
> powerh-l-request at lists.sowder.com
> Unsubscribe: "unsubscribe <password>" in message body to
> powerh-l-request at lists.sowder.com
> http://lists.sowder.com/mailman/listinfo/powerh-l
> This list is closed, thus to post to the list you must be a
> subscriber.
> 
> 

-- 
= = = = = = = = = = = = = = = = = = = = = = = = = = = =
Mailing list: powerh-l at lists.sowder.com
Subscribe: "subscribe" in message body to powerh-l-request at lists.sowder.com
Unsubscribe: "unsubscribe &lt;password&gt;" in message body to
powerh-l-request at lists.sowder.com
http://lists.sowder.com/mailman/listinfo/powerh-l
This list is closed, thus to post to the list you must be a subscriber.