Printer Question - AXIANT 4GL - A3 Size Reports

[Jeff Hoffman]

Syed

I forgot to add that if you start using PCL control characters (the 
temptation will be great to use some of the facilities of a laser), windows 
printing will strip some of the control characters out, so you would have 
to print to a file then use DOS print command, now that is fun!!!!

Jeff

At 08:11 AM 19/10/2005, you wrote:

>Syed
>
>Laser printers I think are the best, just set the default font to courier 
>size 10 or 11 depending upon what will fit your largest report. The main 
>problem is volume of printing required at each print station, the cheapies 
>only support low volume work, if you get one that has a 2 to 3,000 sheet 
>feeder should suffice. You could most probable replace a few of the old 
>dot matix printers with one laser but do not forget redundancy, you should 
>allow for the fact that they do break down.
>
>I personally would recommend a HP laser (has the best PCL support), but I 
>have used a Lexmark lasers as it had a 4,000 sheet (A4) feeded, I could 
>load the paper at the beginning of the day and just forget about it.
>
>Jeff
>
>At 05:07 AM 19/10/2005, you wrote:
>
>>Dear Gurus,
>>Quick Intro: I've migrated a PH/MPEIX application to AXIANT4GL/WINDOWS 
>>(Thin Client).
>>
>>The printers currently in use in MPEIX are
>>          (1) HP 2566 C
>>and  (2) HP 2563 A.
>>
>>These dot matrix printers doesn't seem to work with Windows. The 
>>infrastructure guys say that no Windows XP drivers are available for 
>>these printers.
>>
>>My problem is, these printers are printing A3 size reports.
>>Can anyone help me in knowing the best replacement for these printers in 
>>Windows XP/2003 to print A3 reports.
>>I don't have the option of reformatting the reports to A4 size.
>>
>>I'd appreciate your efforts to help me out of this issue.
>>
>>Thanks and Regards,
>>SYED
>>
>>
>>--
>>= = = = = = = = = = = = = = = = = = = = = = = = = = = =
>>Mailing list: powerh-l at lists.sowder.com
>>Subscribe: "subscribe" in message body to powerh-l-request at lists.sowder.com
>>Unsubscribe: "unsubscribe <password>" in message body to 
>>powerh-l-request at lists.sowder.com
>>http://lists.sowder.com/mailman/listinfo/powerh-l
>>This list is closed, thus to post to the list you must be a subscriber.
>
>--
>= = = = = = = = = = = = = = = = = = = = = = = = = = = =
>Mailing list: powerh-l at lists.sowder.com
>Subscribe: "subscribe" in message body to powerh-l-request at lists.sowder.com
>Unsubscribe: "unsubscribe <password>" in message body to 
>powerh-l-request at lists.sowder.com
>http://lists.sowder.com/mailman/listinfo/powerh-l
>This list is closed, thus to post to the list you must be a subscriber.