Upgrade questions
Witkopp, Richard
Richard.Witkopp@idt.com
Tue, 11 Jun 2002 10:29:35 -0700
It was for more than Cobol. You could generate
definitions for DEC's integrated dictionary that
interfaced with several DEC languages. I can't remember
what it's called, haven't used it in 7 or 8 years.
> -----Original Message-----
> From: Hasse, Christina [mailto:Christina.Hasse@COGNOS.com]
> Sent: Tuesday, June 11, 2002 10:13 AM
> To: 'Edis, Bob'
> Cc: 'powerh-l@lists.swau.edu'
> Subject: RE: Upgrade questions
>
>
> Hi Bob,
>
> It was used to integrate Cobol with PowerHouse. You could create copy
> libraries from PowerHouse and vice-versa. The only problem
> with it was that
> from Cobol to PowerHouse, you did not get the indexing,
> because the Cobol
> copy libraries don't contain that information.
>
> Regards,
>
> Christina Hasse
> ADT North American Technical Manager
> COGNOS CORPORATION
> christina.hasse@cognos.com
> 425 N. Martingale Road, Suite 600
> Schaumburg, IL 60173
> Office: 847 - 285 - 2905
> Cell: 847 - 612 - 6854
>
>
> -----Original Message-----
> From: Edis, Bob [mailto:BEdis@usbnc.org]
> Sent: Tuesday, June 11, 2002 1:09 PM
> To: PowerHouse List (E-mail)
> Subject: RE: Upgrade questions
>
>
> What is PHIntegrator?
>
> -----Original Message-----
> From: Hamilton, Allison [mailto:Allison.Hamilton@Cognos.COM]
> Sent: Tuesday, June 11, 2002 11:20 AM
> To: 'Johnson, Harold A EDUC:EX'; 'powerh-l@lists.swau.edu'
> Subject: RE: Upgrade questions
>
>
> VMS symbol and logical support has been in 8.xx for awhile.
> POW dictionary
> support is in 8.30 and above. PowerHouse 8.30 supports both
> PDC and POW(PHD)
> dictionaries. There was a list posted here awhile ago of all
> the VMSisms
> that we ported into the 8.30 code stream from the 7.10 one.
> We ported over
> as much as we could find with the exception of AllInOne and
> RMS Journalling
> support and PhIntegrator. PHIntegrator is currently under
> investigation for
> inclusion. I think that you will find that PowerHouse 8.30
> is much more
> OpenVMS friendly than 8.20 was. There are some differences
> in behaviour,
> and we have documented as many of those as we know of in the
> Release Notes
> for 8.30, for those that were a concern we have provided an
> option to get
> the 7.10 behaviour in 8.30 if needed.
>
> If you are supported, you should be receiving 8.30D in the
> near future, if
> you have not already, and you can read the Release Notes to get more
> information.
>
> -----Original Message-----
> From: Johnson, Harold A EDUC:EX
> [mailto:Harold.A.Johnson@gems1.gov.bc.ca]
> Sent: Tuesday, June 11, 2002 12:06 PM
> To: 'powerh-l@lists.swau.edu'
> Subject: RE: Upgrade questions
>
>
> What about VMS symbol support; POW dictionary support; etc...? We are
> currently using 710g1 because these functions were lost in
> the so-called
> "improved" version of PH.
>
>
> -----Original Message-----
> From: Hamilton, Allison [mailto:Allison.Hamilton@Cognos.COM]
> Sent: Tuesday, June 11, 2002 6:40 AM
> To: 'Hoppe, Eric EP'; 'powerh-l@lists.swau.edu'
> Subject: RE: Upgrade questions
>
>
> PowerHouse 8.30x is built on OpenVMS version 6.2 and
> certified against 7.2.
> Mailbox support is in 8.30x and above.
> 8.40x is built against OpenVMS 7.2
>
> -----Original Message-----
> From: Hoppe, Eric EP [mailto:Eric.Hoppe@steelscape-inc.com]
> Sent: Monday, June 10, 2002 11:37 AM
> To: 'powerh-l@lists.swau.edu'
> Subject: Upgrade questions
>
>
> All-
>
> We currently have: OpenVMS 7.1, UCX Ver 4.1 - ECO 9 on an
> AlphaServer 4000
> using PH 7.10G1. Our current setup is working great, but we
> are starting to
> get hints from Compaq it is time to upgrade.
>
> I am under the impression in order to go to PH 8.x we need to
> upgrade to UCX
> 5. I am also under the impression that UCX 5 does not support the RMS
> mailbox function which we use heavily. I also think PH 8.x requires a
> higher ver of operating system.
>
> Before I start opening trouble tickets with the vendors, I
> thought I would
> fish out here in the ether for comments from anyone who has
> been through
> this already.
>
> Thanks and I hope there is enough info in this msg.
>
> ---ehops
>
> Eric Hoppe
> Steelscape, Inc.
> Senior Systems Analyst
> 360.673.8247
>
>
> = = = = = = = = = = = = = = = = = = = = = = = = = = = =
> Mailing list: powerh-l@lists.swau.edu
> Subscribe: "subscribe" in message body to
> powerh-l-request@lists.swau.edu
> Unsubscribe: "unsubscribe" in message body to
> powerh-l-request@lists.swau.edu
> http://lists.swau.edu/mailman/listinfo/powerh-l
> This list is closed, thus to post to the list you must be a
> subscriber.
>
> This message may contain privileged and/or confidential
> information. If you
> have received this e-mail in error or are not the intended
> recipient, you
> may not use, copy, disseminate or distribute it; do not open any
> attachments, delete it immediately from your system and
> notify the sender
> promptly by e-mail that you have done so. Thank you.
>
> = = = = = = = = = = = = = = = = = = = = = = = = = = = =
> Mailing list: powerh-l@lists.swau.edu
> Subscribe: "subscribe" in message body to
> powerh-l-request@lists.swau.edu
> Unsubscribe: "unsubscribe" in message body to
> powerh-l-request@lists.swau.edu
> http://lists.swau.edu/mailman/listinfo/powerh-l
> This list is closed, thus to post to the list you must be a
> subscriber.
>
> = = = = = = = = = = = = = = = = = = = = = = = = = = = =
> Mailing list: powerh-l@lists.swau.edu
> Subscribe: "subscribe" in message body to
> powerh-l-request@lists.swau.edu
> Unsubscribe: "unsubscribe" in message body to
> powerh-l-request@lists.swau.edu
> http://lists.swau.edu/mailman/listinfo/powerh-l
> This list is closed, thus to post to the list you must be a
> subscriber.
>
> This message may contain privileged and/or confidential
> information. If you
> have received this e-mail in error or are not the intended
> recipient, you
> may not use, copy, disseminate or distribute it; do not open any
> attachments, delete it immediately from your system and
> notify the sender
> promptly by e-mail that you have done so. Thank you.
>
> = = = = = = = = = = = = = = = = = = = = = = = = = = = =
> Mailing list: powerh-l@lists.swau.edu
> Subscribe: "subscribe" in message body to
> powerh-l-request@lists.swau.edu
> Unsubscribe: "unsubscribe" in message body to
> powerh-l-request@lists.swau.edu
> http://lists.swau.edu/mailman/listinfo/powerh-l
> This list is closed, thus to post to the list you must be a
> subscriber.
>
> = = = = = = = = = = = = = = = = = = = = = = = = = = = =
> Mailing list: powerh-l@lists.swau.edu
> Subscribe: "subscribe" in message body to
> powerh-l-request@lists.swau.edu
> Unsubscribe: "unsubscribe" in message body to
> powerh-l-request@lists.swau.edu
> http://lists.swau.edu/mailman/listinfo/powerh-l
> This list is closed, thus to post to the list you must be a
> subscriber.
>
> This message may contain privileged and/or confidential
> information. If you
> have received this e-mail in error or are not the intended
> recipient, you
> may not use, copy, disseminate or distribute it; do not open any
> attachments, delete it immediately from your system and
> notify the sender
> promptly by e-mail that you have done so. Thank you.
>
> = = = = = = = = = = = = = = = = = = = = = = = = = = = =
> Mailing list: powerh-l@lists.swau.edu
> Subscribe: "subscribe" in message body to
> powerh-l-request@lists.swau.edu
> Unsubscribe: "unsubscribe" in message body to
> powerh-l-request@lists.swau.edu
> http://lists.swau.edu/mailman/listinfo/powerh-l
> This list is closed, thus to post to the list you must be a
> subscriber.
>