question on Debug

[Madeleine D.]

My thanks to everybody who responded on our Debug problem.

It was the USE issue.  We replaced one statement, the first one out of
about 9,  with actual code and the problem was solved.  We've used this
code in about a hundred screens, many of whom have run through Debug just
fine.  

thanks again.
Madeleine D.



At 01:39 PM 4/19/2002 -0700, you wrote:
>Yes.  I found that if I copy "USE" statement code into my screen, then
>compile, I can run in debug mode without this problem.
>
>-----Original Message-----
>From: Madeleine D. [mailto:mmdrake@bctonline.com]
>Sent: Friday, April 19, 2002 1:43 PM
>To: powerh-l@lists.swau.edu
>Subject: question on Debug
>
>
>Has anybody experienced this problem in Debug?  (HP-UX 11.0, PH813d3)
>
>Screen is pretty basic, with a master table coming in, a primary, and some
>designer tables.
>
>When we try to step through debug on the screen, the display stops on
>commented and blank lines, which we've never seen before.
>
>Also, it appears as though the lines displayed are not the ones that are
>actually being executed.  Example, we see the edit procedure on field #1
>display before we see the prompt for the field.  But the edits for field #1
>resolve as expected.
>
>Appreciate any and all suggestions.
>
>thanks
>Madeleine D.
>
>
>= = = = = = = = = = = = = = = = = = = = = = = = = = = =
>Mailing list: powerh-l@lists.swau.edu
>Subscribe: "subscribe" in message body to powerh-l-request@lists.swau.edu
>Unsubscribe: "unsubscribe" in message body to
>powerh-l-request@lists.swau.edu
>http://lists.swau.edu/mailman/listinfo/powerh-l
>This list is closed, thus to post to the list you must be a subscriber.
>