This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
------_=_NextPart_001_01C09D0F.89608BD0
Content-Type: text/plain;
charset="iso-8859-1"
If you run quick with "READ=CHAR" you will not need to press <enter> after
the <CTRL>-B.
Also look at "BLOCK TRANSFER"...i.e.
begin
block transfer
accept MY-FIELD
end
And if I recall, screens in PANEL mode and using MODIFY...
-----Original Message-----
From: Jim Nicoll [mailto:jnicoll@portofhalifax.ca]
Sent: Thursday, February 22, 2001 2:29 PM
To: powerh-l@sphere.swau.edu
Subject: Re: Field editing in QUICK
We use Ctrl-B <enter> quite often. It would be nice if there were a way to
allow Quick to display existing field contents without having to use this
key sequence. Anyone know of such a thing?
Jim Nicoll
Halifax Port Authority
----- Original Message -----
From: "Sherry Baillie" <sbaillie@mbfoster.com>
To: "Richard Sheehan" <sheerich@isu.edu>
Cc: <powerh-l@sphere.swau.edu>
Sent: Friday, February 23, 2001 3:51 AM
Subject: Re: Field editing in QUICK
> Bingo! Ctrl B <enter> did the trick.
>
> Thanks to all who responded!
>
> Sherry
>
>
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Subscribe: "subscribe powerh-l" in message body to majordomo@lists.swau.edu
Unsubscribe: "unsubscribe powerh-l" in message to majordomo@lists.swau.edu
This list is closed, thus to post to the list, you must be a subscriber.
------_=_NextPart_001_01C09D0F.89608BD0
Content-Type: text/html;
charset="iso-8859-1"
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
RE: Field editing in QUICK
If you run quick with "READ=CHAR" you will not need to press <enter> after the <CTRL>-B.
Also look at "BLOCK TRANSFER"...i.e.
begin
block transfer
accept MY-FIELD
end
And if I recall, screens in PANEL mode and using MODIFY...
-----Original Message-----
From: Jim Nicoll [mailto:jnicoll@portofhalifax.ca]
Sent: Thursday, February 22, 2001 2:29 PM
To: powerh-l@sphere.swau.edu
Subject: Re: Field editing in QUICK
We use Ctrl-B <enter> quite often. It would be nice if there were a way to
allow Quick to display existing field contents without having to use this
key sequence. Anyone know of such a thing?
Jim Nicoll
Halifax Port Authority
----- Original Message -----
From: "Sherry Baillie" <sbaillie@mbfoster.com>
To: "Richard Sheehan" <sheerich@isu.edu>
Cc: <powerh-l@sphere.swau.edu>
Sent: Friday, February 23, 2001 3:51 AM
Subject: Re: Field editing in QUICK
> Bingo! Ctrl B <enter> did the trick.
>
> Thanks to all who responded!
>
> Sherry
>
>
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Subscribe: "subscribe powerh-l" in message body to majordomo@lists.swau.edu
Unsubscribe: "unsubscribe powerh-l" in message to majordomo@lists.swau.edu
This list is closed, thus to post to the list, you must be a subscriber.
------_=_NextPart_001_01C09D0F.89608BD0--
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Subscribe: "subscribe powerh-l" in message body to majordomo@lists.swau.edu
Unsubscribe: "unsubscribe powerh-l" in message to majordomo@lists.swau.edu
This list is closed, thus to post to the list, you must be a subscriber.