JCW in Batch - more
conleys2@nationwide.com
conleys2@nationwide.com
Wed, 21 Oct 1998 08:56:10 -0400
Thanks to all who responded. The correct answer is that at compile time it
is considered to be a warning and can be trapped for. At run time however
the message is merely informational and no warning or error is issued. I
consider this to be a HOLE but fortunately it should only occur once when
you convert to 8.19. Hopefully, you do not have job(s) running after the
normal SUCCESSFUL? completion! This is one of the few times that I never
received a single reply from COGNOS on this listserv :-(.
For all of you going to 8.19 BEWARE of this relatively minor issue and I
hope you don't mess up what ever it is that is running!
Regards Steve
Stephen A Conley
10/20/1998 02:15:54 PM
Sent by: Stephen A Conley
To: Powerh-l@lists.swau.edu
cc:
Subject: JCW in Batch - more
Update,
Not entirely true. I only got the correct JCW if I compiled
interactively. When I ran the same test running the exe using auto= then I
got the same problem as they did in batch.
Any ideas????
[969-100]WCDEV<CONLEYS>#qtp auto=testsfd
Executing request 1 ...
---------------------------------------------------------------------------
----
The requested subfile exists but is not format 8 - won't
overwrite/append.
File: NEWSFD
---------------------------------------------------------------------------
----
Records read:
CHIST-DET 0
Transactions processed: 0
Records processed: Added Updated Unchanged
Deleted
NEWSFD 0 0 0
0
Finished.
END OF PROGRAM
[969-100]WCDEV<CONLEYS>#showjcw
CIERROR = 0
JCW = 0
SECURITYANSWER = 0
NULL = 1
QTP = 0
CJCW = 0
[969-100]WCDEV<CONLEYS>#showvar @jcw
JCW = 0
CJCW = 0
[969-100]WCDEV<CONLEYS>#
---------------------- Forwarded by Stephen A Conley/User/NWExternal on
10/20/1998 02:22:03 PM ---------------------------
Stephen A Conley
10/20/1998 02:05:43 PM
Sent by: Stephen A Conley
To: powerh-l@lists.swau.edu
cc:
Subject: JCW in Batch
Below I have include a sample of a problem they Ran into at my current
client and I cannot help them because
I have very little time in the HP3000 world. Apparently if they have a
problem (any problem) in a job stream
and they want to check the status once the QTP has completed the JCW does
not get set (see below). I
ran a similar test interactively and the JCW gets set just fine. This
became an issue when they converted
from 7.29.c6 to 8.19.c1 and had missed some old subfiles. They were
surprised that the JCW check did
not pick up on this!
They contacted COGNOS and found little help here. Is this true? If
someone sees anything inherently wrong with the code below then
I would really appreciate any advice that you could offer up plus I could
stand a lesson or two in HP3000 world.
Thanks In Advance for taking the time to read.
Regards Steve
ALSO note that when I ran interactively that I got JCW=16385 and SHOWJCW
produced JCW=WARN1 which is
what I would expect for the same format 8 won't overwrite/append warning!
JOB JTEMP,MGR.WCDEV,PUB.
Priority = DS; Inpri = 8; Time = UNLIMITED seconds.
Job number = #j1164.
TUE, OCT 20, 1998, 11:14 AM.
HP3000 Release: C.55.00 User Version: C.55.00
MPE/iX HP31900 C.05.08 Copyright Hewlett-Packard 1987.
All rights reserved.
STREAMED BY HECKLERK,MGR.WCDEV (#S736) ON LDEV# 137
STREAM DATE: TUE, OCT 20, 1998, 11:14 AM
:FILE PHD=WCPDLC.PH
:FILE CLMSDB=CLMSDB.AIGDEV
:FILE TT=SISFBAKE.LUIKARTR
:
:QTP INFO="AUTO=QTTT.LUIKARTR"
10/20/1998 11:14 GATESMCDONALD PAGE
1
Run:
Request: 1
Executing request 1 ...
--------------------------------------------------------------------------
-----
The requested subfile exists but is not format 8 - won't
overwrite/append.
File: TT
--------------------------------------------------------------------------
-----
Records read:
SI-SF-CLM-DET 0
Transactions processed: 0
Records processed: Added Updated Unchanged
Deleted
TT 0 0 0
0
Finished.
END OF PROGRAM
:
:SHOWJCW
CIERROR = 0
JCW = 0
SECURITYANSWER = 0
QTP = 0
CJCW = 0
:
:IF JCW>WARN
*** EXPRESSION FALSE: COMMANDS IGNORED UNTIL MATCHING ELSEIF/ELSE
/ENDIF
: SETJCW JCW FATAL
:ENDIF
*** RESUME EXECUTION OF COMMANDS
:
:TELL HECKLERK,MGR.WCDEV TEST IS FINISHED.
:
:EOJ
CPU sec. = 1. elapsed min. = 1. TUE, OCT 20, 1998, 11:14 AM.
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Subscribe: "subscribe powerh-l" in message body to majordomo@lists.swau.edu
Unsubscribe: "unsubscribe powerh-l" in message to majordomo@lists.swau.edu
powerh-l@lists.swau.edu is gatewayed one-way to bit.listserv.powerh-l
This list is closed, thus to post to the list, you must be a subscriber.